Microphones : Headworn Microphones : Audio-Technica Europe - BP893cW

Omnidirectional Condenser Headworn Microphone

Model: BP893cW

Outstanding clarity and intelligibility
Lightweight and ergonomic design
Extremely unobtrusive, 1-inch flexible boom
Secure over-the-ear placement
Extended frequency response for natural vocal reproduction

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

BP893 omnidirectional condenser headworn microphone, less power module. 1.4 m (55") permanently attached miniature cable terminated with locking 4-pin connector for use with Audio-Technica UniPak® body-pack wireless transmitters. Includes AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Available in black and beige, wired and wireless models.

Outstanding clarity and intelligibility
Lightweight and ergonomic design
Extremely unobtrusive, 1-inch flexible boom
Secure over-the-ear placement
Extended frequency response for natural vocal reproduction
Fixed-charge back plate, permanently polarized condenser element
Locking 4-pin microphone output connector compatible with included power module and all Audio-Technica UniPak body-pack wireless transmitters
UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality

Headset Mic Type - Condenser
Microphone Connectivity - Wired
Microphone Type - Condenser
Polar/Pickup Pattern - Omnidirectional
Warranty - Yes
Spec Sheet available - Yes

AUDIO-TECHNICA CASE STYLE: M31
Cable: 1.4 m (55") long (permanently attached to microphone), 1.6mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
Dimensions:
Weight:
Voltage Range: 2.5 to 11 V (wireless only)
Current Consumption: 0.10 mA typical at 5V (wireless only)
Phantom Power Requirements: 11 to 52 V DC 2 mA typical (wired only)
Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
Low Frequency Roll-off: 80 Hz 18 dB/octave (wired only)
Cable Length: 1.40 m
Cable Length: 140 cm
Maximum Frequency Response (Bandwidth): 20000 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Impedance: 245 ohm
Maximum SPL (Sound Pressure Level): 114 dB
Sensitivity: -34 dB
Signal to Noise Ratio: 68 dB
Current Draw: 0 Amps
DC Voltage: 52 Volts
Product Weight: 0 kg
Warranty (Length/Type): 2 Years/Limited End-User

BP893 Submittal Sheet 426 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

Headworn System in Case

by Electro Voice

Sweat-resistant Fitness Headset (Supercardioid) with Adjustable Neckband and Flexible Microphone Boom Arm. Includes (1) HT 747 Windscreen, Black

by Sennheiser

Special Projects Headworn Condenser Vocal Microphone with TA4F Connector

by Electro Voice