: : RDL, Radio Design Labs - AV-LN4

Line Level Audio to Network Interface

Model: AV-LN4

Dante network interface for four audio line-level inputs
Each XLR input provides a network digital audio level of -20 dBFS for a balanced +4 dBu input
Four XLR front-panel inputs
Dual-LED VU meter for each input
Special software not required for module setup

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

Accessoires

The AV-LN4 is an interface that converts four line-level XLR inputs to Dante network audio channels. Special software is not required to configure the AV-LN4. A dual-LED VU meter displays the level for each. The AV-LN4 is a professional grade product for studio quality fidelity and low noise performance.

The AV-LN4 may be powered from an external 24 Vdc power supply, available separately. The AV-LN4 is equipped to operate from a PoE enabled network switch. The AV-LN4 will reserve power from the switch even while being powered from an external 24Vdc supply. If PoE power and an external 24Vdc supply are both feeding an AV-LN4, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.

The AV-LN4 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. The chassis is designed to protect the front panel slide switches from accidental damage.

Dante network interface for four audio line-level inputs
Each XLR input provides a network digital audio level of -20 dBFS for a balanced +4 dBu input
Four XLR front-panel inputs
Dual-LED VU meter for each input
Special software not required for module setup
High resolution 24 bit analog to digital conversion
LED indicator for valid power and network sync
Operation from PoE power (Class 0, IEEE 802.3af) or external 24 Vdc
Mounts on a microphone stand using an RDL SF-MSM1

Dante Enabled - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): 0 C
DC-Spannung: 24 Volts
Tiefe: 151.64 mm
Height: 42.67 mm
Shipping Depth (with packaging): 57.15 mm
Shipping Height (with packaging): 111.12 mm
Shipping Width (with packaging): 177.80 mm
Width: 131.83 mm
Shipping Weight: 0.80 kg
Network Connector: RJ45 Neutrik® etherCON®-style
Digital Audio Ethernet Protocol: Dante
Transmission Rate: 100Mbps
Sample Rates supported: 44.1kHz, 48kHz (default)
Bit Depth Supported: 24bits
Audio Operating Level: -20dBFS = +4dBu
Reference Level: 0dBFS = +24dBu
Inputs (4): XLR (female)
Input Level (-20 dBFS): +4dBu
Input level (maximum): +24dBu
Input Impedance: > 50kohm
Frequency Response: 20Hz to 20kHz (± 0.1dB)
Noise below +4dBu: < -85dB
THD+N: < 0.025% (20Hz to 20kHz, +4dBu/-20dBFS); 0.005% at 1kHz (typ)
CMRR: > 70dB (50Hz to 120Hz)
Übersprechen: < -80dB (20Hz to 20kHz at operating level, any input to any input); < -85dB (1kHz)
Indicators (7): Ethernet Link and Speed (2, rear panel); Sync (front panel); dual-LED VU meter (4, front panel)
Power Requirement: PoE Class 0, IEEE 802.3af, or 24Vdc at 500mA, Ground-referenced
Specification Conditions: Gain/Level: ± 1 dB; Source termination: 150ohm; A to D values measured in digital domain
Package Type: Cardboard Box
WEEE weight: 1.525lb
Zertifizierungen: CE, ROHS

AV-NH1 - Network to Stereo Headphone Amplifier

AV-NL4 - Network to Audio Interface

DD-BN22 - Wall-mounted Bi-directional Mic/Line Dante Network Interface

DD-BN2M - Wall-mounted Bi-directional Mic/Line Dante Audio Interface

DD-BN2ML - Wall-mounted Dante Audio Network Interface

DD-BN31 - 4x4 Wall-mounted Dante Audio Network Interface

DD-BN40 - 4x2 Wall-mounted Dante Audio Network Interface

DD-BTN44 - Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

DDB-BN22 - 2x2 Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN2M - 2x2 Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN2ML - Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN31 - 4x4 Wall-mounted Bi-directional Mic/Line Dante Interface

DDB-BN40 - 4x2 Wall-mounted Bi-directional Mic/Line Dante Interface

DDB-BTN44 - Mini-Jack Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

DDS-BN22 - 2x2 Wall-mounted Dante Audio Network Interface

DDS-BN2M - 2x2 100Mbps Wall-mounted Dante Audio Network Interface

DDS-BN2ML - 100Mbps Wall-mounted Dante Audio Network Interface

DDS-BN31 - 4x4 24-bit Wall-mounted Dante Audio Network Interface

DDS-BN40 - 4x2 24-bit Wall-mounted Dante Audio Network Interface

DDS-BTN44 - RCA Jack Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

FP-NML2 - Network to Mic/Line Interface

FP-NML2P - Network to Mic/Line Interface with PoE

FP-NML2V - Network to Mic/Line Interface with VCA

FP-NML2VP - Network to Mic/Line Interface with VCA, PoE

RU-BNF - Format-A Bi-directional Network Interface

RU-BNFP - Format-A Bi-directional Network Interface with PoE

RU-FN - Format-A to Network Interface

RU-FNP - Format-A to Network Interface with PoE

RU-LB2 - Line-level Bi-directional Network Interface

RU-LB2P - Line-level Bi-directional Network Interface with PoE

RU-LB4 - Line-level Bi-directional Network Interface

RU-LB4P - Line-level Bi-directional Network Interface with PoE

RU-MLB2 - Mic/Line Bi-directional Network Interface

RU-MLB2P - Mic/Line Bi-directional Network Interface with PoE

RU-MLB4 - Mic/Line Bi-directional Network Interface

RU-MLB4P - Mic/Line Bi-directional Network Interface with PoE

RU-NFD - Network to Format-A Interface/Distributor

RU-NFDP - Network to Format-A Interface/Distributor with PoE

RU-NL2 - Network to Line Level Interface

RU-NL2P - Network to Line Level Interface with PoE

RU-NL4 - Network to Line Level Interface

RU-NL4P - Network to Line Level Interface with PoE

SF-NL2 - Network to Audio Interface

SF-NP16E - SF-NP16E PoE+ Network to 16 W Mono Audio Amplifier - 70 V or 100 V

SF-NP35E - PoE++ Network to 35W Mono Audio Amplifier - 70V or 100V

SF-NP40D - 40W Network to Stereo Power Amplifier

SF-NP50A - Network to 50W Mono Audio Amplifier - 70V or 100V

SF-PA50A - 50W Mono Audio Amplifier - 70V or 100V

SF-UN1 - USB to Dante Network Interface

SF-XMN4 - Microphone to Network Interface

Network 669400 kb - Data Sheet

Projektliste

SF-MSM1
SysFlex Microphone Stand Mounting Adapter