Shure Microflex MX400 Series microphones are miniature gooseneck-mounted electret condenser microphones designed primarily for speech and vocal pickup. They can be mounted on lecterns, pulpits, or conference tables.
Wide dynamic range and frequency response for
accurate sound reproduction across the audio spectrum
Balanced, transformerless output for increased immunity to noise over long cable runs
Shock mount that provides over 20dB isolation from
surface vibration noise
Locking flange mount for permanently securing
microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Includes a mute switch and an LED
Polar/Pickup Pattern - Other
Microphone Type - Condenser
Microphone Type - Other
Spec Sheet available - Yes
Operating Temperature (Maximum):
135 F
Operating Temperature (Minimum):
0 F
Maximum Frequency Response (Bandwidth):
17 kHz
Maximum Frequency Response (Bandwidth):
17000 Hz
Minimum Frequency Response (Bandwidth):
50 Hz
Minimum Frequency Response (Bandwidth):
0.05 kHz
Impedance:
150 ohm
DC Voltage:
52 Volts
Output Impedance:
150 ohms actual (rated at 180 ohms) at 1000Hz
Dynamic Range at 1k ohms Load:
96.2 dB (100dB at 0 gain)
Common Mode Rejection:
45 dB (minimum)
Mute Switch Attenuation:
50 dB (minimum)
Preamplifier Output Clipping Level:
–6dBV (0.5V), –12dB at 0 gain (1% THD)
Polarity:
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
Power Requirements:
11 to 52V DC phantom, 2mA
Relative Humidity:
0 to 95 %
Certification:
Eligible to bear CE Marking, Conforms to European EMC Directive 89/336/EEC, Meets applicable tests and performance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments