8-inch Two-way Coaxial Ceiling Loudspeaker System

8-inch two-way coaxial ceiling loudspeaker system is complete two-way ceiling loudspeaker in low profile package. The package consists of bezel assembly, grille, rear enclosure, 8-inch coaxial two-way loudspeaker and internal line-matching transformer. The loudspeaker features waveguide coupled titanium coated dome tweeter. The loudspeaker utilizes 2nd order crossover network at 2.5kHz with comprehensive protection circuit to protect the network, woofer and tweeter drivers from excessive power levels. It utilizes transformer that offers selection of 7.5 (70V only), 15, 30 or 60W delivered to the loudspeaker system using either 70 or 100V lines or 8 Ohms bypass. Selection is via a convenient switch on the front of the waveguide. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure with fiberglass damping material provides an optimum internal volume for extended low-frequency performance. A rear cover with provisions for junction box fitting provides access to 4-pin terminal block that allows direct connection to the speaker with 12-gauge wire and provides pass through to additional speakers. A tile bridge is included for safe suspension of the C8.2HC ceiling system in drop ceiling that uses mineral wool or other fiber-based ceiling tiles. They provide controlled dispersion, high-efficiency, high-maximum output, ease of installation and wide-range reproduction of music or voice.

• Warranty - Yes
• Loudspeaker Mount Type - Ceiling
• Transformer Option - Yes
• Loudspeaker Voltage - 70V
• Loudspeaker Voltage - 100V
• Spec Sheet available - Yes

• Speaker Diameter (Driver): 10.60 in
• Maximum Frequency Response (Bandwidth): 20 kHz
• Maximum Frequency Response (Bandwidth): 20000 Hz
• Minimum Frequency Response (Bandwidth): 50 Hz
• Minimum Frequency Response (Bandwidth): 0.05 kHz
• 100V Taps: 3.75, 7.5, 15 or 30 Watt
• 70V Taps: 1.88, 3.75, 7.5, 15 or 30 Watt
• Power Handling: 75 Watt
• Sensitivity: 91 dB
• Transformer Option: Yes
• Certifications: UL, CE
• Impedance: 8 ohm
• Maximum SPL (Sound Pressure Level): 110 dB
• Chassis Size: 8 in
• Coverage (Conical): 110 deg
• Nominal Impedance: 8 ohms
• Maximum Peak Calculated SPL: 116 dB
• LF Transducer: 8-inch (203.2mm) polypropylene cone
• HF Transducer: 1-inch (25mm) Ti Mylar laminate dome
• Connector: Phoenix type removable with screw terminals and loop-through, accepts 12-gauge wire
• Enclosure Material: Steel enclosure and UL94V-0 rated baffle and bezel
• Grille: Powder-coated steel
• Color: White
• Warranty (Length/Type): 3 years
• Peak Power: 300 Watt
• Height: 7 in
• Shipping Weight: 24 lbs
• Product Weight: 11 lbs

RPK-82-B
Rough-in Package for C8.2 and C8.2LP Ceiling Speaker

RR-82-B
Rough-in Plate for EVID C8.2 and C8.2LP Ceiling Speaker