Bezel for RCX-CD1

Series:

Compare

Project List

Product Info

Tech Specs

Documents

Bezel for RCX-CD1.

Audio inputs (12): 2 per room (1 mic and 1 line)
Input signal range Mic: -20 to –60 dBu
Input signal range Line: -14 to +4 dBu (input selector set to LINE only)
Input signal range Line: -21 to +4 dBu (input selector set to LIN+MIC)
Input signal range Music: -30 to +4 dBu
Input signal range Paging: -30 to +4 dBu
Phantom Voltage: 24 VDC selectable on each input (IEC 1938: 1996-12)
Gain line: Off to 18 dB (front panel adjustable, input selector set to LINE only)
Gain line: Off to 25 dB (front panel adjustable, input selector set to LIN+MIC)
Gain Mic: Off to 65 dB
Frequency response(Line): 15 to 20000 Hz (+/- 0.5 dB)
Frequency response(Mic): 120 to 20000 Hz (+/- 0.75 dB; integral low - cut filter –3 dB @ 75 Hz)
Frequency response Music: 10 to 18000 Hz (+/-0.5 dB, filter FLAT) -3 dB @ 50 Hz, -18 dB @ 20 Hz (LO-CUT)
Frequency response Paging: 20 to 7500 Hz (+/-1.5 dB)
Headroom: 18 dB
Noise (below +4 dBu out): <-80 dB (line input, local mode, uncombined)
Noise: <-70 dB (mic input, local mode, uncombined, 60 dB gain)
Noise: <-75 dB (music mode)
THD+N: <0.025 % (line inputs) ; <0.1% (mic inputs)
Meters (6): Front panel dual-LED VU metering for music (1) and room (5) inputs
Status outputs (6): 15 mA open collector (internal 24 V pullup; voltage drop 4 Vdc @15 mA)
Remote control inputs (7): 6 for room combinations, 1 for paging
Ramp rate (audio level): 3 seconds for full adjustment (RCX-1, D-RCX1, RCX-3)
Room Control range: 36 dB + Off
Power Requirement: 24 VDC @ 2 A
Shipping Weight: 2.70 lbs

Bezel 3908 kb - Data Sheet