PRO AV CATALOG

SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS, Tower, Network Card Options, USB, DB9, 8 Outlets
Series: SmartPro Series
Model: SMART1050SLT
- SmartPro line-interactive UPS system is ideal for voice, data, medical and industrial networking applications
- Line-interactive automatic voltage regulation (AVR) maintains selectable 100V, 110V or 120V nominal output during brownouts as low as 83V and overvoltages to 145V
- Enables continuous operation through blackouts, voltage fluctuations and surges
- Line-interactive AVR provides a 14% boost during brownouts and a 12% voltage cut during overvoltages
- Standard internal battery set offers 19 min. runtime at half load (325W) and 7 min. at full load (650W)
- SmartPro line-interactive UPS system is ideal for voice, data, medical and industrial networking applications
- Line-interactive automatic voltage regulation (AVR) maintains selectable 100V, 110V or 120V nominal output during brownouts as low as 83V and overvoltages to 145V
- Enables continuous operation through blackouts, voltage fluctuations and surges
- Line-interactive AVR provides a 14% boost during brownouts and a 12% voltage cut during overvoltages
- Standard internal battery set offers 19 min. runtime at half load (325W) and 7 min. at full load (650W)
- Space-saving upright tower format
- Network interfaces support simultaneous communications via built-in USB port, DB9 serial port and SNMPWEBCARD slot
- HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
- Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
- UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, timed inverter shutoff, activate self-test and output power control
- NEMA 5-15P input plug; 8 x battery-supported NEMA 5-15R output receptacles
- Front panel LEDs offer current monitoring, voltage regulation and battery charge level information
- UPS ships fully assembled in full compliance with DOT regulations; no time-consuming connection of internal batteries by user required
- Single-line tel/DSL or network Ethernet line surge suppression
- Package includes SMART1050SLT UPS System, PowerAlert Software CD, USB and serial cabling
- Warranty - Yes
- UL Rated - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Cord Length (in/mm): 70.87 in
- Number of Outlets: 8
- UL Rated: Yes
- AC Voltage: 100,110,120 Volts
- Active Power: 650 Watt
- DC Voltage: 24 Volts
- Power Factor: 0.60 %
- Depth: 13.20 in
- Height: 10.20 in
- Width: 6.80 in
- Product Weight: 36 lbs
- Shipping Weight: 39.60 lbs
- Warranty (Length/Type): 3 years
- Output Volt Amp Capacity (VA): 1050
- Output kVA capacity (kVA): 1
- Nominal Output Voltage(s) Supported: 100V; 110V; 120V
- Nominal Voltage details: 120V default (voltage selection via back panel switches)
- Frequency Compatibility: 50 / 60 Hz
- Output voltage regulation (line mode): -13%, + 15%
- Output voltage regulation (Battery mode): +/- 5%
- Built-in UPS output receptacles: 8 5-15R outlet(s)
- Output AC waveform (AC mode): Sine wave
- Output AC waveform (battery mode): Pure Sine wave
- Rated input current (at maximum load): 6.1A (120V), 6.6A (110V), 7.2A (100V)
- Nominal Input Voltage(s) Supported: 100V AC; 110V AC; 120V AC
- UPS input connection type: 5-15P
- UPS Input cord length (ft.): 6
- UPS Input cord length (m): 1.8
- Recommended Electrical Service: 15A 120V
- Full load runtime (minutes): 7 min. (650w)
- Half load runtime (minutes): 19 min. (325w)
- Battery recharge rate (included batteries): Less than 6 hours from 10% to 90%
- Replacement battery cartridge (internal UPS battery replacement): RBC24-SLT
- Battery Access: Battery access door
- Battery replacement description: Hot-swappable, user replaceable batteries
- Voltage regulation description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 95 to 145 (120v), 87 to 133 (110v), 83 to 121 (100v)
- Overvoltage correction: Voltage reduction of 12% applies when input is 127 to 145 (120v), 116 to 133 (110v), 111 to 121 (100v)
- Undervoltage correction: Voltage boost of 14% applies when input is 95 to 108 (120v), 87 to 99 (110v), 83 to 90 (100v)
- LED Indicators: Status LEDs indicate line power, battery power, AVR, overload and replace battery status - with a 3-LED level meter for load and battery charge level
- Site wiring fault indication: Rear panel site wiring fault LED
- Alarms: Audible alarm indicates power failure and overload conditions
- Alarm cancel operation: Power-fail alarm can be silenced using alarm-cancel switch
- Switches: 2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support nominal voltage selection
- UPS AC suppression joule rating: 690
- UPS AC suppression response time: Instantaneous
- UPS Dataline suppression: 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
- EMI / RFI AC noise suppression: Yes
- Installation form factors supported with included accessories: Tower
- Primary Form Factor: Tower
- Shipping dimensions (height x width x depth: 14 x 9.8 x 18.5 inch
- UPS housing material: Steel
- Cooling Method: Fan
- Storage Temperature Range: +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.
- Relative Humidity: 0 to 95%, non-condensing
- AC mode BTU / hr. (full load): 141.1
- Battery mode BTU / hr. (full load): 452.7
- Audible Noise: Audible Noise < 50 dBA at Front Side 1 Meter
- Communications interface: USB; DB9 Serial; Slot for SNMP/Web interface
- Network monitoring port description: Supports detailed monitoring of UPS and site power conditions
- PowerAlert software: Included
- Communications Cable: USB and DB9 cabling included
- WatchDog compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications.
- Transfer Time: 4-6 milliseconds
- Low voltage transfer to battery power (setpoint): 95V (120V), 87V (110V), 83V (100V)
- High voltage transfer to battery power (setpoint): 145V (120V), 133V (110V), 121V (100V)
- Cold Start (startup in battery mode during a power failure): Cold-start operation supported
- High availability UPS features: Hot swappable batteries
- Certifications: Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI
- RoHS Compliant: Yes
- Cisco Compatible: Yes
Suggested Products

Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com