PRO AV CATALOG

SmartPro 120V 2.2kVA 1.6kW Line-Interactive UPS, Tower, Network Card Options, USB, DB9 Serial
Series: SMARTPRO®
Model: SMART2200VS
- 2200VA/1600 watt output capacity accommodates a variety of server, networking and telecom devices
- High power density 2.2kVA UPS system occupies only 106 square inches of floor space with a height of only 14.25 inches
- Compatible with North American 120V/60 Hz power as found in the USA, Canada and Mexico
- Offers 7 minutes runtime with a full load of 2200VA and 19 minutes with a half load of 1100VA
- Line interactive voltage regulation corrects severe brownouts and overvoltages from 79 to 147v back to normal 120v levels without using battery power
- 2200VA/1600 watt output capacity accommodates a variety of server, networking and telecom devices
- High power density 2.2kVA UPS system occupies only 106 square inches of floor space with a height of only 14.25 inches
- Compatible with North American 120V/60 Hz power as found in the USA, Canada and Mexico
- Offers 7 minutes runtime with a full load of 2200VA and 19 minutes with a half load of 1100VA
- Line interactive voltage regulation corrects severe brownouts and overvoltages from 79 to 147v back to normal 120v levels without using battery power
- 9 total outlets (7 NEMA5-15R; 2 NEMA5-15/20R)
- Includes NEMA 5-20 straight blade 20 amp input plug connection
- Notification of system status via 5 LEDs and multi-function audible alarms
- Included PowerAlert Software provides e-mail notification of power problems and the simultaneous automatic unattended shutdown of multiple servers
- 4 built-in communications ports (2-DB9, 2-USB) for remote monitoring and unattended shutdown
- Slot for SNMP/web card (part#: SNMPWEBCARD) and environmental sensor (part#: ENVIROSENSE) for remote communications in large IP environments
- Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting completely locked computers by automatically switching UPS power off and back on again
- Communication ports support on battery, low battery, power restored, AC line voltage, DC battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature and line frequency status messaging. Interface supports timed inve
- 3 pairs of customized load management receptacles can be individually powered off and back on again via software interface to reboot remote equipment or shed less critical loads to extend battery runtime for the most critical equipment
- Built-in Emergency Power Off (EPO) interface supports emergency shutoff in large facilities
- Hot-swappable/user replaceable batteries allow on-site battery replacement without powering off connected equipment
- UPS battery set ships fully assembled and ready for use, no time consuming, connection of individual internal batteries by user is necessary
- UL (USA), cUL (Canada), NOM (Mexico), Class A (Emissions)
- Package Includes SMART 2200VS UPS System, PowerAlert Software and cabling, Instruction manual
- Warranty - Yes
- UL Rated - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Cord Length (in/mm): 96 in
- Estimated Runtime: 7 minutes
- Estimated Runtime: 0.12 hours
- UL Rated: Yes
- AC Voltage: 120 Volts
- Current Draw: 16 Amps
- DC Voltage: 48 Volts
- Depth: 12 in
- Height: 14.20 in
- Width: 9.20 in
- Product Weight: 52.40 lbs
- Shipping Weight: 58.80 lbs
- Warranty (Length/Type): 2 Years
- Output volt amp capacity: 2200 VA
- Output Watt Capacity: 1600
- Output power factor: 0.7
- Nominal Output Voltage(s) Supported: 120 V
- Frequency Compatibility: 60 Hz
- Output voltage regulation (line mode): -2.25
- Output voltage regulation (Battery mode): +/- 5%
- Built-in UPS output receptacles: 7 5-15R outlet(s); 2 5-15/20R outlet(s)
- Built-in controllable switched load banks: Three switchable two-outlet 5-15R load banks
- Output AC waveform (AC mode): Sine wave
- Output AC waveform (battery mode): PWM sine wave
- UPS input connection type: 5-20P
- Input circuit breaker: 20 A
- Recommended Electrical Service: 20A 120V
- Half Load Runtime: 19 min. (800w)
- Battery recharge rate (included batteries): Less than 4 hours from 10% to 90%
- Voltage regulation description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 79V to 147V
- Overvoltage correction: Input voltages between 128 and 147 are reduced by 12%
- Undervoltage correction: Input voltages between 95 and 104 are boosted by 12%
- Severe undervoltage correction: Input voltages between 79 and 94 are boosted by 24%
- UPS AC suppression joule rating: 480
- UPS AC suppression response time: Instantaneous
- EMI / RFI AC noise suppression: Yes
- UPS Shipping dimensions (height x width x depth): 16 x 14.8 x 19.8 inch
- UPS housing material: Polycarbonate
- Cooling Method: Fan
- Storage Temperature Range: -15 to +50 °C
- Relative Humidity: 0 to 95%, non-condensing
- AC mode BTU / hr. (full load): 347.2
- Battery mode BTU / hr. (full load): 812.9
- Audible Noise: < 47 dBA At Front Side 1 Meter
- Transfer Time: 2-4 milliseconds
- Low voltage transfer to battery power (setpoint): 79
- High voltage transfer to battery power (setpoint): 147
- UPS Certifications: Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
- Product Warranty with Registration: 3 Years
- RoHS Compliant: Yes
- Cisco Compatible: Yes
Suggested Products

Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com