TesiraLUX IDH-1 - AVB/TSN Enabled Video Encoder

Model: TesiraLUX IDH-1

Part #: 0426.900

Includes one HDMI 2.0 port and one DisplayPort 1.2 port
Accepts video signals up to and including 4K60
Supports a virtual matrix of up to 128 Tesira devices
Flexible color space including Rec. 2020
Supports high dynamic range (HDR)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Videos

The TesiraLUX IDH-1 is an AVB/TSN enabled video encoder capable of transmitting video signals up to and including 4K60. The IDH-1 functions as a server-class device in a Tesira media system and is configured through the Tesira software. Acting as an AVB talker, the IDH-1 fully integrates digital audio and video on a single network, allowing for simplified lip sync management and transmission latencies (including scaling) of less than 2 frames. Integrated design, configuration, and control is facilitated via a single software platform, reducing the design time needed to deploy media systems. Multiple software-based options are available for managing bandwidth, including setting the maximum resolution, frame rate floor, and/or a rate of compression. The AVB/TSN signal transmission can be switched over 1Gb or 10Gb ports while control signals are managed via a separate 1Gb Ethernet port. The IDH-1 accepts 8 channels of PCM audio for embedding/de-embedding, and includes 2 mic/line level analog inputs. The TesiraLUX IDH-1 is well suited for legal proceedings, lecture halls, multi-use spaces and other applications where low latency, synchronized media distribution is needed.

Includes one HDMI 2.0 port and one DisplayPort 1.2 port
Accepts video signals up to and including 4K60
Supports a virtual matrix of up to 128 Tesira devices
Flexible color space including Rec. 2020
Supports high dynamic range (HDR)
Integrated lip sync management
Supports 8 channel PCM audio for embedding/deembedding
Automated EDID management between TesiraLUX and the input source
2 Mic/line level analog audio inputs
4 Logic connections can be used as inputs or outputs
Serial port for the output of command strings
Half-rack chassis

Decoder or Encoder Signal Type - Audio
Decoder or Encoder Signal Type - Video
Decoder/Encoder Type - Analog to Digital Decoder/Encoder
Rackmountable - Yes
ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: CE, UL, FCC
Input Signal Types: HDMI, DisplayPort
Number of Channels: 8
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
DC Voltage: 48 Volts
Depth: 10.40 in
Height: 1.75 in
Width: 8.50 in
Warranty (Length/Type): 5 Years
Control Connection: RJ-45 with Ethernet cable (CAT5, CAT5e, CAT6, or CAT7)
Media Connections:
•1Gb: RJ-45 with Ethernet (CAT6 or CAT7) or SFP+
•1Gb: SFP+
Video Inputs:
•Supported Resolutions: Up to 4K60
•Physical Interfaces: HDMI, DisplayPort
•Colorspace: Up to Rec. 2020
•Color Formats: YUV, RGB
•HDR Support: HDR 10
•Chroma Subsampling: 4:4:4, 4:2:2, 4:2:0
•Color Depth: 8-bit, 10-bit, 12-bit, 16-bit
•System Transit Latency: less than 2 frames (33ms)
•HDMI Audio Formats: 8ch PCM
Logic I/O:
•Logic Input Trigger: Contact Closure or 5V TTL
•LED Driver: 5V/10mA per output
•Logic Output Type: Open Collector, Sink 40V/300mA per output
•RS-232: 57600/8-N-1
Analog Audio Inputs:
•Frequency Response (20Hz to 20kHz at +4dBu): +0/-0.25dB
•THD+N (20Hz to 20kHz): at 0dB Gain, +4dBu In: less than 0.006%, at 54dB Gain, -50dBu In: less than 0.040%
•EIN (20Hz to 20kHz, 66dB Gain, 150-ohm): less than -125dBu
•Dynamic Range (20Hz to 20kHz, 0dB): greater than 108dB
•Input Impedance (balanced): 8k-ohm
•Maximum Input: +24dBu
•Input Gain Range (6dB Steps): 0 to 66dB
•Crosstalk, channel to channel, 1kHz:
•0dB gain, +4dBu input: less than -85dB
•54dB gain, -50dBu input: less than -75dB
•Sampling Rate: 48kHz
•A/D Converters: 24-bit