Microphones : Ceiling Mounted Microphones : Clockaudio - CCRM 4000

Retractable Back Electret Condenser Suspended Microphone

Model: CCRM 4000

Control ports allow DSP connection and Link / daisy chain expansion to other CCRM 4000 Retracta units
Logic Hi / Lo for DSP mute detection port
Master & Slave units are Identical in construction. Two rotary 0-9 digital decimal encoders are used to set Master (00) and 01 – 99 determines slave designation. The factory default is set to Master (00)
XLR socket allows easy and fast connection of the audio to mixer or DSP. A 9-48 Volt phantom power is required
IR remote control is supplied with the master unit. Remote control can be used to activate the units in the absence of a DSP

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Microphone features logic Hi/Lo for DSP mute detection port. Master and slave units are Identical in construction. Two rotary 0-9 digital decimal encoders are used to set Master (00) and 01 – 99 determines slave designation. XLR socket allows easy and fast connection of the audio to mixer or DSP. A 9-48 Volt phantom power is required. IR remote control is supplied with the master unit. Remote control can be used to activate the units in the absence of a DSP.

Control ports allow DSP connection and Link / daisy chain expansion to other CCRM 4000 Retracta units
Logic Hi / Lo for DSP mute detection port
Master & Slave units are Identical in construction. Two rotary 0-9 digital decimal encoders are used to set Master (00) and 01 – 99 determines slave designation. The factory default is set to Master (00)
XLR socket allows easy and fast connection of the audio to mixer or DSP. A 9-48 Volt phantom power is required
IR remote control is supplied with the master unit. Remote control can be used to activate the units in the absence of a DSP
IR receiver sensor with integral green programme mode led and red range led (supplied with master unit)
Audio cable length 2.5 Metres
Supplied with 350 degree rotation, 40 degree knuckle joint angle microphone with cardioid polar pattern
Up to 99 slave units can be daisy chained to the master
Ceiling bezel fitted with detection switch
Universal mains switched mode power supply available as separate item. Operates up to 4 units
Automatic safety detection for cable hang-ups

Microphone Connectivity - Wired
Microphone Type - Condenser
Polar/Pickup Pattern - Cardiod

Cable length (in/mm): 98.43 in
Maximum Frequency Response (Bandwidth): 18 kHz
Maximum Frequency Response (Bandwidth): 18000 Hz
Minimum Frequency Response (Bandwidth): 50 Hz
Minimum Frequency Response (Bandwidth): 0.05 kHz
Impedance: 200 ohm
Maximum SPL (Sound Pressure Level): 125 dB
Sensitivity: -40 dB
Signal to Noise Ratio: 64 dB
Current Draw: 0.50 Amps
DC Voltage: 18 Volts
Product Weight: 5.95 lbs

C 303-RF - Tri Element Array Hanging Microphone

C 3S - Suspended Condenser Microphone, Satin Black Finish

C 3S-RF - Suspended Gooseneck Cardioid Condenser Microphone with CPPW01-RF

C 3S-RF-CP - Suspended Gooseneck Cardioid Condenser Microphone with GSM Radio Frequency Interference

C 3SE-RF - Suspended Semi Rigid Goosenec Cardioid Condenser Microphone

C 3SEW-RF - Suspended Semi Rigid Goosenec Cardioid Condenser Mcrophone with GSM Interference

C 3SW - Suspended Cardioid Condenser Microphone with Short Flexible Shaft

C 3SW-RF - Suspended Gooseneck Cardioid Condenser Microphone with CPPW01-RF Supply

Microphone 78 kb - Other

Project List

Suggested Products

Ceiling Microphone

by Biamp

Pendant Microphone and PoE+ amplifier

by Biamp

Low-profile Ceiling Microphone

by Biamp

Products

Retractable Back Electret Condenser Suspended Microphone

Model: CCRM 4000

Suggested Products

Contact

Solutions

Insights

About

Privacy Policy

Terms & Conditions

Copyright © 2025 A-V Services, Inc. | All Rights Reserved | Powered By Chatter Creative