• Amplifier Type - Standard Amplifier
• Energy Star rated - Yes
• Low Voltage Control - Yes
• Rackmountable - Yes
• Warranty - Yes
• Spec Sheet available - Yes

• Operating Temperature (Maximum): 104 F
• Operating Temperature (Minimum): 41 F
• Mounting Width: 0.25 in
• Maximum Frequency Response (Bandwidth): 20 kHz
• Maximum Frequency Response (Bandwidth): 20000 Hz
• Minimum Frequency Response (Bandwidth): 20 Hz
• Minimum Frequency Response (Bandwidth): 0.02 kHz
• Certifications: UL
• Impedance: 8 ohm
• Number of Channels: 2
• Sensitivity: 4 dB
• Signal to Noise Ratio: 90 dB
• AC Voltage (Maximum): 240 Volts
• AC Voltage (Minimum): 100 Volts
• Active Power: 14.60 Watt
• Current Draw: 2.50 Amps
• DC Voltage: 24 Volts
• Standby Power: 6 Watt
• Depth: 6.99 in
• Height: 1.74 in
• Width: 4.33 in
• Product Weight: 3.24 lbs
• Regulatory Compliance: ErP (1275/2008/EC), UL 62368, UL 2043, FCC Class B commercial and residential use
• Warranty (Length/Type): Limited
• Audio:
  •Input Signal Types: Balanced or unbalanced analog line-level
  •THD+N: <0.1% at 1 kHz @ -3 dB full rated output power
  •Crosstalk: -75 dB at 1 kHz
  •Input Sensitivity: 1.23 Vrms, +4 dBu balanced; 0.316 Vrms, -10 dBV unbalanced; For 25 W @ 8 Ohms, 50 W @ 70 V/100 V
  •Gain: 21.5 dB @ 8 Ohms, Balanced
  •Protection: Clip limiter, over current, under voltage, over temperature, DC offset, extreme high frequency
  •Wake Signal Threshold: -57 dBu (1 mV) max
• Connectors:
  •Speaker Output: (1) 6-pin, 5.08 mm pitch, 12 A plug with screw locking retainers; Power amplifier outputs; Wire Size: Terminals accept up to 12 AWG (3.31 mm2)
  •ALS OUT:(1) 3.5 mm connector, female; Unbalanced line level audio outputs; Maximum Output Level: 2.24 Vrms, +7 dBV (+9.2 dBu); Fixed audio output for assisted listening devices duplicates the summed audio input
  •AUDIO IN 1-2 (UNBALANCED): (2) RCA connectors, female; Unbalanced line level audio inputs; Maximum Input Level: 2.24 Vrms, +7 dBV (+9.2 dBu)
  •AUDIO IN 1-2 (UNBALANCED): (1) 3.5 mm connector, female; Unbalanced line level audio inputs; Maximum Input Level: 2.24 Vrms, +7 dBV (+9.2 dBu)
  •AUDIO IN 1-2 (BALANCED): (1) 5 pin 3.5 mm detachable terminal block; Balanced line level audio inputs; Maximum Input Level: 7.75 Vrms, +20 dBu; Input Impedance: 20k Ohms
  •REMOTE: (1) 2 pin 3.5 mm detachable terminal block; Connect to contact closure to place amplifier in standby mode.
  •G: (1) M3 with captivated internal tooth lock washer screw; Chassis ground lug
• Controls & Indicators:
  •PWR: (1) Bi-color white/red LED; White indicates operating power supplied; Red indicates standby mode.
  •FAULT: (1) Red LED; Indicates an over temperature or over current fault
  •SIGNAL: (1) Bi-color white/red LED; White indicates input signal presence; Red indicates input signal clipping/limiting
  •Hi-Z: (1) White LED; Indicates speaker output is in Hi-Z (70 V/100 V) mode
  •MONO/STEREO: (1) Slide switch to select STEREO, MONO; STEREO preserves channels; MONO creates a mono downmix of the input signals
  •HiZ/LoZ: (1) Slide switch to select LoZ (low impedance 4-8 ohms) or Hi-Z (high impedance 70 V/100 V)
  •VOLUME, BASS, TREBLE: (3) Rotary knobs adjust volume, bass (+/- 6 dB) and treble (+/- 6 dB) levels
• Environmental:
  •Humidity:10% to 90% RH (non-condensing)
• Construction:
  •Chassis: Metal, convection cooled (fanless)
  •Front Panel: Metal, black finish with polycarbonate label overlay
  •Mounting: Freestanding, surface mount or 1/2 width 1 RU 19 in. rack mountable; Gangable with other Crestron modular and X series products (adhesive feet and surface mounting brackets included); Ganging kit and rack mounting kit optional