Signal Processing Systems : Distribution Amplifiers : Evertz - 500VMDA

SDI Monitoring Reclocking Distribution Amplifier

Model: 500VMDA

Fully hot-swappable from front of frame with no BNC disconnect required
Tally output on Frame Status bus upon loss of input signal
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 500FR frame with 500FC VistaLINK® Frame Controller
Selectable NTSC pedestal on/off
Passes embedded audio to SD-SDI output

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Evertz 500VMDA Reclocking Distribution Amplifier provides inexpensive distribution and monitoring of your SMPTE ST 259 (270Mb/s) serial digital video signal. The DA features an auto-equalized input with nine outputs that can be selected as either SDI or composite analog. The 500VMDA in conjuction with the 510DCDA-HD gives an upgrade path to monitoring future HD-SDI signals without having to rewire your installation. The 500VMDA is housed in the 3RU 500FR frame that will hold up to 16 modules.

Fully hot-swappable from front of frame with no BNC disconnect required
Tally output on Frame Status bus upon loss of input signal
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 500FR frame with 500FC VistaLINK® Frame Controller
Selectable NTSC pedestal on/off
Passes embedded audio to SD-SDI output
Supports SMPTE ST 259-C (270Mb/s) video with embedded audio
9 outputs selectable as SD-SDI or composite analog (NTSC/PAL)
Independent isolated output drivers to ensure no cross channel leading effects (i.e. no need to terminate unused outputs)
Selectable NTSC pedestal on/off
Passes embedded audio to SD-SDI output
Card Edge LED's: Reclocker Locked, Max. Equalization Warning, Module Health Status, Video present, cable length warning, and video standard LEDs

Spec Sheet available - Yes

Serial Video Input - Standard: SMPTE ST 259-C (270Mb/s) 525 or 625 line
Serial Video - Number of Inputs: 1
Serial Video Input - Connector: BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization: Automatic to 430m @ 270Mb/s with Belden 1694A or equivalent cable
Serial Video Input - Return Loss: > 15dB up to 270Mb/s
Serial Video Input - Embedded Audio: SMPTE ST 272-A
Serial Video Input - Number of Outputs: Up to 9 reclocked outputs (jumper selectable)
Serial Video Output - Connector: BNC per IEC 61169-8 Annex A
Serial Video Output - Signal Level: 800mV nominal
Serial Video Output - DC offset: 0V ±0.5V
Serial Video Output - Rise and Fall Time: 470ps nominal
Serial Video Output - Overshoot: < 10% of amplitude
Serial Video Output - Return Loss: > 15dB up to 270Mb/s
Serial Video Output - Wideband Jitter: < 0.2UI
Analog Video Output - Standard: NTSC, SMPTE ST 170 if input is 525i/59.94; PAL-B ITU-R BT 1700 if input is 625i/50
Analog Video - Number of Outputs: Up to 9 (jumper selectable)
Analog Video Output - Connector: BNC per IEC 61169-8 Annex A
Analog Video Output - Signal level: 1V p-p nominal
Analog Video Output - DC Offset: 0V ±0.1V
Analog Video output - Return loss: > 35dB up to 5MHz
Voltage: +12V DC
Power: 6 Watts
EMI/RFI: Complies with FCC Part 15 Class A, EU EMC Directive
Number of Slots: 1

SDI Monitoring Reclocking Distribution Amplifier 46 kb - Data Sheet

Project List

Products

SDI Monitoring Reclocking Distribution Amplifier

Model: 500VMDA

Contact

Solutions

Insights

About

Privacy Policy

Terms & Conditions

Copyright © 2025 A-V Services, Inc. | All Rights Reserved | Powered By Chatter Creative