4K HDMI over HDBaseT Extender with Loop Out

Model: HCE III-L TX

Supports resolutions up to 4K at 60Hz (4:4:4)
Supports data rates up to 18 Gbps
HDCP 2.2/ HDCP 1.4 Compliant
Transmits Ultra HD/4K signals up to 130ft (40m)
Supports HDR10 and Full 3D

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

The HCE III-L Tx is a premium HDMI 2.0 HDBaseT™ Extension System for Ultra HD/4K and HDR formats featuring an HDMI loop out on the transmitter for preview monitoring, as well as an additional output on the receiver for local distribution. The HCE III-L Tx/Rx supports 4K@60Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps with HDCP 2.2 compliance.

The HCE III can transmit Ultra HD/4K signals to distances up to 130 feet (40 meters) and 1080p to distances up to 230 ft. (70 meters) over a single category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE.

Supports resolutions up to 4K at 60Hz (4:4:4)
Supports data rates up to 18 Gbps
HDCP 2.2/ HDCP 1.4 Compliant
Transmits Ultra HD/4K signals up to 130ft (40m)
Supports HDR10 and Full 3D
HDMI loop-put on transmitter and additional HDMI output on receiver
Bi-directional IR and RS-232 extension
Bi-directional PoE (Rx powered by Tx or Tx powered by Rx)
EDID selector (auto, local, remote)

Extender Type - Audio
Extender Type - HDMI
Rackmountable - Yes
Warranty - Yes
HDBaseT - Yes

Operating Temperature (Maximum): 116.60 F
Operating Temperature (Minimum): 32 F
Transmission Range: 230 ft
Wireless: No
Current Draw: 1 Amps
DC Voltage: 24 Volts
Depth: 2.60 in
Height: 0.80 in
Width: 5.50 in
Product Weight: 1.19 lbs
Warranty (Length/Type): 3 Years
Audio: Support DTS-HD, Dolby-HD
Input Signal Type(s): (1) HDMI Type A, (1) USB [firmware]
Output Signal Type(s): (1) HDMI Type A [Loop Out], (1) HDBaseT [RJ45]
Supported Resolutions: 4K at 60Hz (4:4:4), 1080p, 1080i, 720p(50Hz), 576p, 480p, 576i, 480i
Video Bandwidth: up to 18 Gbps
Compliance: HDMI 2.0, HDCP 2.2, HDCP 1.4
RS-232: (1) RS-232 [3-pin phoenix]
IR Extension: (1) x IR input [3.5mm stereo mini-jack]; 1 x IR output [3.5mm stereo mini-jack]
Storage Temperature: - 40° ~ 158° F (-40° to 70° C)
Relative Humidity: 0 ~ 90% non-condensing
MTBF: 50000 hours
Rack Mounting Option: Standard 19 inch rack-mountable design

DCE II Rx - DVI Over CAT Extender - Receiver

DCE II Tx - DVI Over CAT Extender - Transmitter

HCE II Tx - HDMI over HDBaseT Extender - Transmitter

HCE III Tx - 4K HDMI over HDBaseT Extender with Control and Bi-Directional PoE - Transmitter

HCE III-L RX - 4K HDMI over HDBaseT Extender with Loop Out

HTE III Rx - 4K HDMI over HDBaseT Extension System - Receiver

HTE III Tx - 4K HDMI over HDBaseT Extension System - Transmitter

HWCE Tx/Rx - 4K HDMI and USB 2.0 over HDBaseT Wall Plate Extender

PM-CR104-U - 4K HDMI over CATx HDBaseT Receiver

Suggested Products

ConferX Low-Profile Dual HDMI Wall Plate Transmitter and Receiver via HDBaseT

by AVPro Edge

ConferX Low-Profile USB-C Wall Plate Transmitter and Receiver via HDBaseT

by AVPro Edge

ConferX Low-Profile HDMI Wall Plate Transmitter and Receiver via HDBaseT

by AVPro Edge

Products

4K HDMI over HDBaseT Extender with Loop Out

Model: HCE III-L TX

Suggested Products

Contact

Solutions

Insights

About

Privacy Policy

Terms & Conditions

Copyright © 2025 A-V Services, Inc. | All Rights Reserved | Powered By Chatter Creative