A user pulls the desired amount of cable out and that length will remain.

Once at the desired length, the cable may still be pulled and extended further or pulled and released to allow the cable to retract to its stored position.

Unlike crude mechanical reelers: Our Servoreeler can stop at any chosen position of cable-payout; There is no tedious "hunting" for a mechanical "address" to stop the cable is eliminated; and there is no frustrating hair trigger release.

Logic circuitry provides the brain for These "smart" operational characteristics: The initial pull on the cable is sensed by the control circuit; when a threshold velocity is exceeded, the servo is activated-imparting a light holdback tension and sensory feedback to the user; when the cable has been pulled to the desired length and held momentarily, the circuit will sense the cessation of motion and cut-off power to the servo.

Designed to distinguish between intentional "pull" commands and low, constant velocity or short tugs that are accidentally imparted on the cable.

Because the system utilizes motion sensing, the Servoreeler will not damage itself, its cable or tear a microphone away from the user if the microphone is clipped on a lapel or blouse.