RC7-1BH for the 1Beyond Hawk

Model: RC7-1BH

Extends power to cameras and assembly (no factory camera PSU required), PTZ control and video, and dual channel audio over a CAT6 cable between 10m-100m.
Integrated 1x2 HDMI Distribution Amplifier
Simple Plug and Play installation, no programming required.
Allows pass-through of manufacturer firmware updates from codec to camera.
All hardware-specific camera and codec connection cables included.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The RC7-1BH™ camera extension kit has been designed to deliver a transparent, reliable, and cost-effective link between the head-end and the 1Beyond Hawk. A 2-RU RC-RKM™ rack shelf is included for the RC7-HE™ module at the head-end.

Sound Control Technologies (SCT) Camera Extension Kits are designed to streamline the installation of digital video PTZ camera systems. By simplifying complex cabling and extending traditional distance limitations up to 100m, SCT’s extension kits provide integrators with cost and time saving solutions.

Extends power to cameras and assembly (no factory camera PSU required), PTZ control and video, and dual channel audio over a CAT6 cable between 10m-100m.
Integrated 1x2 HDMI Distribution Amplifier
Simple Plug and Play installation, no programming required.
Allows pass-through of manufacturer firmware updates from codec to camera.
All hardware-specific camera and codec connection cables included.
PowerSniffer included for testing SCTLink™ cable conductor continuity.
Integrator only required to provide a CAT6 SCTLink™ Cable.
Base Kit: Inclusive of RC7 Modules, Kit Cables, Power Supply and Rack Shelf
RC7-CE Camera Module
RC7-HE Head-End/Codec Module
RCC-C005-0.4M RS232 Cable
RCC-C001-0.3M HDMI Cable
RCC-H001-1.0M HDMI Cable
WPS-48 Power Supply
RC-RKM™ Rack Shelf

ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Certifications: UL, CE, FCC, CCC, TÜV, RCM and RoHS2
Color: Black
Warranty (Length/Type): 3 Years
Video Format: HDMI, up to 1920x1080p at 60Hz, dual buffered outputs with HDCP support
HDMI Connector (RC7-CE™): HDMI Input
HDMI Connector (RC7-HE™): 1x2 DA HDMI Outputs
RS232 Connector (RC7-HE™): 9-Pin D-Sub Male
Audio In/Out: 3.5mm TRS Jacks, Stereo Line Level Unbalanced
Ethernet Connectivity (RC7-CE™): Single 10/100 Port
Ethernet Connectivity (RC7-HE™): 10/100 Two Port Layer 2 Ethernet Switch
Power Out (RC7-CE™): 12VDC 6.5mm x 3mm Barrel to power the camera/camera assembly
SCTLINK™ CABLE SPECS: SCT recommends CAT6 or better cable for the SCTLink™. The use of a shielded cable, while not required for most platforms, is highly recommended. Proper termination and testing, along with good cable management, minimizes potential problems
Wiring Termination Standard: T568A or T568B 10m Minimum - 100m Maximum Length
Power Consumption: A linked kit will consume 16W, plus the power consumption of attached camera
RC7-CE™ Camera End Module: Dimension:H 1.6 x W 6.48 x D 4.55 inch, Weight: 0.9 lbs/408g
RC7-HE™ Head End Module: Dimension: H 1.6 x W 8.65 x D 4.55 inch, Weight: 1 lbs/453g
WPS-48™ Power Supply (Included): Dimension: H 1 x W 2.98 x D 5.96 inch; Weight: 0.84 lbs/380g; Input: 100 to 240VAC, 50Hz-60Hz, 1.8A Max, Output: 48VDC, 2.5A Max; Output Connector: 3 Pin-Din
Cameras: Panasonic AW-UE150, Poly Director II, Sony BRC-H800 and Sony X1000
Codecs: Poly RPG310/500/700/7500 and generic codecs

Kit 458054 kb - Data Sheet

Project List

Products

RC7-1BH for the 1Beyond Hawk

Model: RC7-1BH

Contact

Solutions

Insights

About

Privacy Policy

Terms & Conditions

Copyright © 2025 A-V Services, Inc. | All Rights Reserved | Powered By Chatter Creative