Audio Production Equipment : Audio Mixers / Consoles : ClearOne - CONVERGE Pro 2 128TD

Multi-channel Microphone Automixer

Model: CONVERGE Pro 2 128TD

Part #: 910-3200-002-D

16 Dante inputs and 16 Dante outputs for audio networking
Built-in analog Telco interface for POTS conferencing
12 mic/line inputs and 8 mic/line outputs.
Built-in USB audio
C-Link and P-Link enable addition of DSPs and peripherals

More Product Information Below

Compare

Project List

Product Info

Tech Specs

An advanced multi-channel microphone automixer with the latest audio DSP algorithms and built-in support for conferencing through an analog phone line plus Dante™ audio networking.

16 Dante inputs and 16 Dante outputs for audio networking
Built-in analog Telco interface for POTS conferencing
12 mic/line inputs and 8 mic/line outputs.
Built-in USB audio
C-Link and P-Link enable addition of DSPs and peripherals
Flexible control options include Touch Panel Controller, BYOD dialer apps or 3rd party control modules
Configure an entire system of C-linked DSPs with Pro Console software.
Built-in DARE™ algorithm for dynamic feedback elimination
Reduced foot-print and power consumption
Applications:
Conferencing using analog phone lines
Audio recording
Pre-recorded digital audio
Web conferencing
UC audio conferencing
Audio networking over a LAN
Bridge web conferences with analog phone calls
Sound reinforcement with DARE™
Environments:
Conference rooms
Training rooms
Lecture halls
Courtrooms
Telemedicine theaters
Houses of Worship

Dante Enabled - Yes

Mic/Line Inputs and Outputs:
•Inputs: Balanced audio inputs, 3.81mm Orange color Phoenix/Euroblock type male header, Push-on mini-terminal block
•Outputs: Balanced audio outputs, 3.81mm Black color Phoenix/Euroblock type male header, Push-on mini-terminal block
•Frequency Response: 20Hz – 22kHz at +4dBu, +/- 0.5dBu
•EIN (Equivalent Input Noise): 20kHz BW, max gain, Rs = 150OHM, -126dBu
•THD + N (Total Harmonic Distortion + Noise): 20Hz – 22kHz at +4dBu, line level, 0.006%; 20Hz – 22kHz at -56dBu, mic level, <0.04%
•Dynamic Range: 20Hz – 20kHz at 0dB, >105dB
•Crosstalk (Mic/Line): Channel to Channel, stimulus at 20dBu to receptor at -56dBu, 1kHz, < -98dB
•Input Impedance: Balanced (line to ground), 2.2kOHM, 1%
•Nominal Input Level: Adjustable -56dB to 0dB, 7dB step coarse gain
•Maximum Input Level: -65dBu to 20dBu
•Phantom Power: 48V, Impedance 6.81kOHM
•Output Impedance: Balanced (line to ground), 95OHM, 1%
•Output Level: 0dBu (Nominal), 20dBu (Max), -40dBu (Selectable)
USB Audio:
•Port Type: USB-B connector
•Audio: Digital Audio, 2 x 2 bidirectional channels
•Sample Rate: 48kHz
•Sample Bit Depth: 24-Bit
•Compatible: USB 2.0, USB 3.0
Maximum Frequency Response (Bandwidth): 22 kHz
Maximum Frequency Response (Bandwidth): 22000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz

Suggested Products

Avia 12x8 Digital Signal Processor

by Crestron Electronics, Inc.

10 input, 2-channel mixer Plena Easy Line Mixer

by Bosch Conferencing and Public Address Systems

22 Channel Digital Mixing Console with Dante

by Yamaha Commercial Audio Systems, Inc.