: : RDL, Radio Design Labs - SF-BNC2

Bidirectional Unbalanced Stereo Audio Network Interface

Model: SF-BNC2

Dante network interface for two audio inputs and two audio outputs
Inputs and outputs on front-panel RCA jacks and stereo 3.5mm mini-jacks
Selectable Dante sample rates - 44.1kHz, 48kHz, 88.2kHz and 96kHz
Converts two unbalanced line-level audio sources to Dante network channels
Converts two Dante network audio signals to unbalanced line level

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

The SF-BNC2 is a bidirectional Dante audio network interface. It features two unbalanced audio inputs (left and right) on RCA or stereo 3.5mm Mini-jack connectors, as well as two unbalanced audio outputs (left and right) on RCA and stereo 3.5mm Mini-jack connectors. Special software is not required to configure the SF-BNC2. Each input provides a network digital audio level of -20dBFS for an unbalanced -10dBV input. Each output provides -10dBV unbalanced for a network digital audio level of -20dBFS. The SF-BNC2 is a professional grade product for studio quality fidelity and low noise performance.

The SF-BNC2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.

The SF-BNC2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.

Dante network interface for two audio inputs and two audio outputs
Inputs and outputs on front-panel RCA jacks and stereo 3.5mm mini-jacks
Selectable Dante sample rates - 44.1kHz, 48kHz, 88.2kHz and 96kHz
Converts two unbalanced line-level audio sources to Dante network channels
Converts two Dante network audio signals to unbalanced line level
Special software not required for module setup
Exceptional low-noise and low-distortion performance
High resolution 24 bit digital to analog conversion
Legendary RDL analog filtering enhances superb audio performance
LED indicator for valid power and network sync
Operation from PoE power (Class 0, IEEE 802.3af)
Equipped for SysFlex™ rack mounting or surface mounting

Dante Enabled - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): 0 C
Tiefe: 146.56 mm
Height: 42.67 mm
Width: 70.87 mm
Product Weight: 0.41 kg
Shipping Weight: 0.51 kg
Specification:
•Network Connector: RJ45 with Link and Speed indicators
•Digital Audio Ethernet Protocol: Dante
•Transmission Rate: 100Mbps
•Sample Rates Supported: 44.1kHz, 48kHz (default), 88.2kHz, 96kHz
•Bit Depth Supported: 24 bits
•Audio Operating Level: -20dBFS = -10dBV
•Reference Level: 0dBFS = +10dBV
Line Inputs to Network Interface:
•Inputs (4): Mini-jack Stereo or RCA jacks (2, L and R)
•Input Level (for +4dBu/-20dBFS): -10dBV nominal
•Input Level (maximum): +10dBV
•Input Impedance: > 15 k-ohm
•Frequency Response: 20Hz to 20kHz (± 0.5dB)
•Noise below -20dBFS (20 to 20kHz): < -80dB
•Crosstalk: < -85dB (L into R, R into L, 20Hz to 20kHz)
•THD+N: < 0.05% (20Hz to 20kHz, -20dBFS); 0.02% at 1kHz (typ)
•Headroom: 20dB
Network to Line Outputs:
•Outputs (4): Mini-jack Stereo or RCA jacks (2, L and R)
•Output Level (operating): -10dBV nominal
•Output Level (maximum): +10dBV
•Output Impedance: 40-ohm
•Frequency Response: 20Hz to 20kHz (+/- 0.5dB)
•THD+N: < 0.1%
•Noise: < -75dB (below -10dBV)
•Crosstalk: < -70dB (20Hz to 20kHz)
•Headroom above -10dBV: 20dB
Indicators :
•Ethernet Link and Speed (2, rear panel); Sync (front panel)
•Power Requirement: PoE Class 0, IEEE 802.3af
•Specification Conditions: Gain/Level: ± 1dB; Source termination: 150-ohm, A to d values measured in digital domain
•Package Type: Cardboard Box
•Package dimensions: 7 x 4.375 x 2.25 in
•Tariff code: 8517.18.0050

AV-NH1 - Network to Stereo Headphone Amplifier

AV-NL2 - Network to Audio Interface

AV-XMN4 - Microphone to Network Interface

DD-BN22 - Wall-mounted Bi-directional Mic/Line Dante Network Interface

DD-BN2M - Wall-mounted Bi-directional Mic/Line Dante Audio Interface

DD-BN2ML - Wall-mounted Dante Audio Network Interface

DD-BN31 - 4x4 Wall-mounted Dante Audio Network Interface

DD-BN40 - 4x2 Wall-mounted Dante Audio Network Interface

DD-BTN44 - Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

DDB-BN22 - 2x2 Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN2M - 2x2 Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN2ML - Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN31 - 4x4 Wall-mounted Bi-directional Mic/Line Dante Interface

DDB-BN40 - 4x2 Wall-mounted Bi-directional Mic/Line Dante Interface

DDB-BTN44 - Mini-Jack Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

DDS-BN22 - 2x2 Wall-mounted Dante Audio Network Interface

DDS-BN2M - 2x2 100Mbps Wall-mounted Dante Audio Network Interface

DDS-BN2ML - 100Mbps Wall-mounted Dante Audio Network Interface

DDS-BN31 - 4x4 24-bit Wall-mounted Dante Audio Network Interface

DDS-BN40 - 4x2 24-bit Wall-mounted Dante Audio Network Interface

DDS-BTN44 - RCA Jack Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

FP-NML2 - Network to Mic/Line Interface

FP-NML2P - Network to Mic/Line Interface with PoE

FP-NML2V - Network to Mic/Line Interface with VCA

FP-NML2VP - Network to Mic/Line Interface with VCA, PoE

RU-BNF - Format-A Bi-directional Network Interface

RU-BNFP - Format-A Bi-directional Network Interface with PoE

RU-FN - Format-A to Network Interface

RU-FNP - Format-A to Network Interface with PoE

RU-LB2 - Line-level Bi-directional Network Interface

RU-LB2P - Line-level Bi-directional Network Interface with PoE

RU-LB4 - Line-level Bi-directional Network Interface

RU-LB4P - Line-level Bi-directional Network Interface with PoE

RU-MLB2 - Mic/Line Bi-directional Network Interface

RU-MLB2P - Mic/Line Bi-directional Network Interface with PoE

RU-MLB4 - Mic/Line Bi-directional Network Interface

RU-MLB4P - Mic/Line Bi-directional Network Interface with PoE

RU-NFD - Network to Format-A Interface/Distributor

RU-NFDP - Network to Format-A Interface/Distributor with PoE

RU-NL2 - Network to Line Level Interface

RU-NL2P - Network to Line Level Interface with PoE

RU-NL4 - Network to Line Level Interface

RU-NL4P - Network to Line Level Interface with PoE

SF-NP35E - PoE++ Network to 35W Mono Audio Amplifier - 70V or 100V

SF-NP50A - Network to 50W Mono Audio Amplifier - 70V or 100V

Audio Network Interface 1185131 kb - Data Sheet

Projektliste

Audio Network Interface 1755114 kb - Other

Projektliste

Audio Network Interface 3103608 kb - Other

Projektliste

Audio Network Interface 918979 kb - Other

Projektliste