Portable Single Channel IFB Beltpack with 1/4-inch Jack

Series: Two-Wire Intercom

Model: IFB-325

Meets critical requirements of the television broadcast industry, as well as other live or recorded media applications
System is composed of user stations, central electronics and control panels
Maximum standard configuration allows four control panels, three central electronics and twelve user stations

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Dokumente

Portable single channel IFB beltpack with 1/4-inch jack. Meets critical requirements of the television broadcast industry, as well as other live or recorded media applications. System is composed of user stations, central electronics and control panels. A modular approach assures the optimum configuration for each installation. Should system expansion be desired, additional components may be added as necessary. A typical system may consist of the following: up to four control panels, one central electronics unit, four user stations and assorted cabling and interconnect units. Maximum standard configuration allows four control panels, three central electronics and twelve user stations.

Meets critical requirements of the television broadcast industry, as well as other live or recorded media applications
System is composed of user stations, central electronics and control panels
Maximum standard configuration allows four control panels, three central electronics and twelve user stations

Wireless - Yes
Spec Sheet available - Yes

Tiefe: 1" (2.54 cm)
Width: 3.75" (9.53 cm)
Height: 1.5" (3.81 cm)
Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): 0 C
Maximum Frequency Response (Bandwidth): 8 kHz
Maximum Frequency Response (Bandwidth): 8000 Hz
Minimum Frequency Response (Bandwidth): 250 Hz
Minimum Frequency Response (Bandwidth): 0.25 kHz
Tiefe: 45.72 mm
Height: 127 mm
Width: 88.90 mm
Product Weight: 0.45 kg
Farbe: Gray
Supplied Power Requirement: 32Vdc nominal (standard RTS line) 50 to 80mA
Earset: 150 to 600 ohms headphones
Intercom Channel Input Level: 2 Vp-p (0dBu) nominal
Intercom Channel Input Impedance: 200 ohms ±5%
Noise Contribution: less than -60 dB on the line
Voltage Gain: 27 ±3 dB from the line
Maximum Output: 165 mW into 150ohms
Headset Connector Type: 1/4-inch Monaural Plug
Intercom Channel Connectors Type: XLR-3F

Central IFB Electronics Station 689878 kb - Data Sheet

Projektliste