Hörhilfen : Hörverstärker Systeme : Williams AV - IR SY11 D

IR Plus Complete with Dante

Model: IR SY11 D

System Includes:
IR M1
(2) IR E4
IDP 008
(4) RX22s

View Manufacturers Website

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

IR PLus Complete with Dante - Includes: 1) IR M1 D IR + Infrared Modulator / Wi-Fi Server with Dante input supporting 2 channels, (2) IR E4 IR + Infrared emitters, (1) MLB 003 metal linking bar,(4) WIR RX22-4N receivers, (2) BAT KT6 rechargeable batteries and 2-bay charger, (4) HED 021 headphones, (2) NKL 001 neckloops and (1) IDP 008 ADA wall plaque.

System Includes:
IR M1
(2) IR E4
IDP 008
(4) RX22s
(2) CHG 3502
(2) NKL 001
(4) HED 021
(4) BAT 026-2
MLB 003
(2) BKT 024

ROHS Compliant - Yes
Warranty - Yes
Wireless Receiver Transmission - IR
Spec Sheet available - Yes

Tiefe: 208.28 mm
Height: 44.45 mm
Width: 482.60 mm
Product Weight: 2.40 kg
Wirkleistung: 36 Watt
Farbe: Black
Warranty (Length/Type): 2 Years
Zertifizierungen: CE, FCC, RCM, WEEE, CB Scheme, ISED, VCCI
Minimum Frequency Response (Bandwidth): 40 Hz
Minimum Frequency Response (Bandwidth): 0.04 kHz
Maximum Frequency Response (Bandwidth): 16000 Hz
Maximum Frequency Response (Bandwidth): 16 kHz
Signal to Noise Ratio: 67 dB
Number of Receivers Supplied: 4
Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): 0 C
Wechselspannung (Minimum): 110 Volts
Wechselspannung (Maximum): 240 Volts
IR E4:
•Dimensions: 7.5” (W) x 1.4” (H) x 3.6” (D) (19.1 cm x 3.6 cm x 9.1 cm)
•Weight: 0.8 lb (362 g)
•Color: Black
•Power: 48 VDC supplied by IR M1 via CAT 5e cable.
•Coverage Area: Up to 18,000 square feet (1,670 sq. m) in single channel mode
•Connectivity: +48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1.
•Operating requirements:0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
•Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
•Warranty: 2 years on Emitter; 90 days on accessories
IR M1:
•Rack Mount: Single Rack Unit
•Power Supply: International Desktop Supply
•Output: +48VDC, 0.75A center-positive
•Power Switch: Rocker switch with LED
•Modulation: FM Wideband, +50kHz deviation, 50uS pre-emphasis
•Carrier Frequency: Selectable, 2.3/2.8 or 3.3/3.8MHz
•Total Harmonic Distortion:Less than 2%, electrical response
•Audio Processor Functions: DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control
•Auto Carrier Shut-Off: Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage.
•Infrared Test LED: Dual IR LED for receiver testing, monitoring, and audio signal testing.
•Audio Input: (2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power
•Internal Test Tone: 400 Hz internal test tone selectable as audio input source for setup and diagnostics
•Remote Configuration: Available through embedded website
•Headphone Output: (2) 1/4" headphone jacks on front panel for monitoring CH A and CH B audio inputs
•Emitter Output Jack: Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication and Baseband signals for IR transmission

CHG 3502 - Dual Charger

HED 021 - Folding headphones

IR E4 - IR Plus Emitter IR E4

IR M1 D - IR + Infrared Modulator / Wi-Fi Server with Dante input supporting 2 channels. Includes TFP 065 power supply and WLC 004 line cord.

MCAT-277-IR-M1.pdf 311795 kb - Data Sheet

Projektliste

IRPlusFlyer_5_25_21.pdf 755961 kb - Brochure

Projektliste

MAN-273_C-IR-M1.pdf 1552472 kb - Instructions

Projektliste