WaveCAST™ C Wi-Fi Audio System

Model: WF T5C

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Videos

The WaveCAST™ C is a real-time audio over Wi-Fi platform designed for pro-audio applications where high-quality sound is required. Its integration with third-party room systems allows AV professionals to control and monitor the WaveCAST C using Telnet commands via Ethernet.

Audio is streamed to an app on personal devices or to the WAV Pro Wi-Fi Receiver, which can be used for assistive listening and other purposes.

ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Warranty (Length/Type): 2 Years
Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): 0 C
Maximum Frequency Response (Bandwidth): 16000 Hz
Maximum Frequency Response (Bandwidth): 16 kHz
Minimum Frequency Response (Bandwidth): 31 Hz
Minimum Frequency Response (Bandwidth): 0.03 kHz
Certifications: FCC, WEEE, Industry Canada, CE, UK CA, RCM
Depth: 209.55 mm
Height: 43.69 mm
Width: 214.63 mm
Product Weight: 1.45 kg
Colour: Black
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 18 Watt
Current Draw: 0.75 Amps
DC Voltage: 24 Volts
Signal to Noise Ratio: 64 dB
Rack Mount: Standard 19 inch Rack, one EIA rack space high, 1/2 space wide 1-2 units can be mounted in a single rack space with optional RPK 005 (single) or RPK 006 (double) Rack Mount Kits
Power On Indicator: Push On/Push Off latching power button with backlight. Green backlight indicates power ON, backlight off indicates power OFF
Storage Temperature: -4 to +158 Deg F (-20 to 70 Deg C)
User Interface: 1. 3.12 inch High Resolution OLED display with selections via buttons. 2. Hosted Web page. 3. Telnet commands over ethernet (see our WaveCAST and FM+ Programmers Guide” for available commands and protocol)
Dante: (1x) RJ-45 jack. Only available on WF T5CD
Ethernet: RJ-45 on back of unit supports CAT 5e cable lengths up to 328 feet (100 meters); 10/100 Base-T IEEE 802.3 compliant, unique MAC address. RJ-45 jack used for web page and streaming audio out. An external Router/DHCP Server is required to stream audio to receiving devices
Audio Section: Audio Inputs: (1x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power. Optional RJ-45 Dante Input (“D” models only)
Audio Processor Functions: DSP based; Compression: 1:1, 1.5:1 or 2:1; High-pass and Low-pass Filter Frequency control, Music, Voice, and Hearing Assistance Audio Presets
Total Harmonic Distortion: Less than 0.25% at 1 kHz (RF output)
Common Mode Rejection: Greater than 57 dB at 1 kHz, Mic or Line mode
Audio Input Gain Adjust: Adjustable from +24dB to -60 dB, in 1dB steps from front screen or web page
Phantom Power: 14.4 VDC applied through 2.2 kOhms resistors to analog combo jack: Pin 2 and Pin 3 on XLR jack, or tip and ring on ¼ inch TRS jack
Audio Level Display: Front screen bar graph display, each segment representing 3dB. It ranges from -18 (1 segment lit) to +12dB (10 segments lit). Over-range warning is indicated by ‘OLVD’ and flashing empty bar
Headphone Output: 1/4 inch TRS stereo jack, mono signal, 7.8 mW total power with 33ohms
Dante Output: (1x) RJ-45 jack, only available on WF T5CD

WF R2-03 - WAV Pro Wi-Fi Receiver

MCAT297A-1022-T5C-Specification-Data-1.pdf 444552 kb - Data Sheet

Project List

MAN-281B-0323-WaveCAST-C-User-Manual.pdf 1654613 kb - Instructions

Project List

WaveCAST System Explained at ISE 2023

Project List