Microphones : Headworn Microphones : Audio-Technica Europe - BP892CL4

MicroSet Omnidirectional Condenser Headworn Microphone with 55" Cable Terminated

Model: BP892CL4

Handles high sound pressure levels with ease
Extremely intelligible natural audio
Inconspicuous, lightweight headset with capsule diameter of just 2.6mm
Ideal for applications requiring minimum visibility
Ergonomic under-ear design flexible, lightweight contoured loop hooks behind the ear for an ultra-secure

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

MicroSet omnidirectional condenser headworn microphone with 55" cable terminated with Lemo connector for Sennheiser wireless. BP892 subminiature omnidirectional condenser headworn microphone, less power module. 1.4 m (55") permanently attached miniature cable terminated for Sennheiser wireless systems using locking 3.5 mm connector. Includes AT8440 cable clip, AT8464 dual-ear microphone mount, two AT8157 windscreens, two AT8156 element covers, a moisture guard and a carrying case.

Handles high sound pressure levels with ease
Extremely intelligible natural audio
Inconspicuous, lightweight headset with capsule diameter of just 2.6mm
Ideal for applications requiring minimum visibility
Ergonomic under-ear design flexible, lightweight contoured loop hooks behind the ear for an ultra-secure
Comfortable fit with or without glasses
Comes equipped with AT8464 dual-ear microphone mount
Converts single ear-worn MicroSet to a dual-ear-worn unit for maximum stability and comfort
Fixed-charge back plate, permanently polarized condenser element
Flat, roll-off (wired only) switch
Accessories furnished:

Headset Mic Type - Condenser
Microphone Connectivity - Wired
Microphone Type - Condenser
Polar/Pickup Pattern - Omnidirectional
Warranty - Yes
Spec Sheet available - Yes

Certifications: FCC
Low Frequency Roll-off: 80 Hz 18 dB/octave (wired only)
Open Circuit Sensitivity: -49 dB (3.5 mV) re 1V at 1 Pa
Phantom Power Requirements: 11 to 52 V DC 2 mA typical (wired only)
Current Consumption: 0.10 mA typical at 5V (wireless only)
Voltage Range: 2.5 to 11 V (wireless only)
Weight:
Dimensions:
OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
Cable: 1.4 m (55") long (permanently attached to microphone), 1.6mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
AUDIO-TECHNICA CASE STYLE: M31
Maximum Frequency Response (Bandwidth): 20 kHz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Dynamic Range: 104 dB
Impedance: 250 ohm
Maximum SPL (Sound Pressure Level): 135 dB
Sensitivity: -49 dB
Signal to Noise Ratio: 63 dB
Current Draw: 0 Amps
DC Voltage: 52 Volts
Height: 0.32 in
Warranty (Length/Type): 2 Years Limited End-User
Cable Length: 4.59 ft
Maximum Frequency Response (Bandwidth): 20,000 Hz

Headworn Microphone 549 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

Headworn System in Case

by Electro Voice

Special Projects Headworn Condenser Vocal Microphone with TA4F Connector

by Electro Voice

Micro-headworn Condenser Microphone with TA4F Connector, Beige

by Electro Voice