Microphones : Boundary Microphones : Audio-Technica U.S., Inc. - PRO44

Cardioid Condenser Boundary Microphone

Model: PRO44

Low profile for minimum visibility
Wide-range condenser element with low-mass diaphragm for superior performance
Self-contained electronics eliminate need for external power modules
Rugged design and construction
25ft (7.6m) detachable cable

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The PRO 44 boundary microphone with its half-space unidirectional polar pattern, low-profile design and outstanding sound quality, it is ideal for conference tables, podiums, lecterns and other installed-sound uses. This versatile boundary mic’s self-contained electronics eliminate the need for external power modules. The PRO 44 is equipped with wide-range condenser element with low-mass diaphragm for superior performance.

Low profile for minimum visibility
Wide-range condenser element with low-mass diaphragm for superior performance
Self-contained electronics eliminate need for external power modules
Rugged design and construction
25ft (7.6m) detachable cable

Microphone Connectivity - Wired
Microphone Type - Boundary
Microphone Type - Condenser
Polar/Pickup Pattern - Cardiod
Polar/Pickup Pattern - Half-cardiod
Warranty - Yes
Spec Sheet available - Yes

Cable Length: 762 cm
Cable Length: 7.62 m
Maximum Frequency Response (Bandwidth): 16 kHz
Maximum Frequency Response (Bandwidth): 16000 Hz
Minimum Frequency Response (Bandwidth): 70 Hz
Minimum Frequency Response (Bandwidth): 0.07 kHz
Dynamic Range: 86 dB
Impedance: 100 ohm
Maximum SPL (Sound Pressure Level): 114 dB
Sensitivity: -25 dB
Signal to Noise Ratio: 66 dB
Wireless: No
Current Draw: 0 Amps
DC Voltage: 52 Volts
Depth: 90.50 mm
Height: 15 mm
Width: 73 mm
Product Weight: 0.07 kg
Warranty (Length/Type): 2 Years/Limited End-User
Impedance: 100 ohms
Open Circuit Sensitivity: -25 dB (56.2 mV) re 1V at 1 Pa
Frequency Response: 70-16,000 Hz
Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
Element: Fixed-charge back plate, permanently polarized condenser
Cable: 25' (7.6 m) long, permanently attached
connector type: TB3M-type
Dimensions: 2.87" (73.0 mm) maximum width, 3.56" (90.5 mm) maximum length, 0.59" (15.0 mm) height
Maximum load protection: 2.4 oz (67 g)
Phantom Power Requirements: 9-52V, 2 mA typical
Signal to Noise: 66 dB, 1 kHz at 1 Pa
Dynamic Range (Typical): 86 dB, 1 kHz at Max. SPL
Maximum Input Sound Level: 114 dB SPL, 1 kHz at 1% T.H.D.

PRO 44 Submittal Sheet 409 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

Devio DTM-1 - Desktop Microphone

by Biamp

Installed boundary layer microphone (cardioid, pre-polarized condenser) (White)

by Sennheiser

Boundary Microphone

by Electro Voice