The WyreStorm 4x4 Quick-Install pack is a system of HD switching and extension that comprises of a 4 Input/4 Output HD Matrix together with 4 display receivers that together provide a total solution for single-cable HD Distribution and Control over distances of up to 40m/131ft) in residential or commercial settings. The MX0404-QI pack enables ANY four HD devices to be viewed independently and simultaneously on ANY four displays, with full 3D support, over distances of up to 40m/131ft, with full control of the connected sources as well as output from the matrix from display locations via wide band IR control of source devices or RS232. The system itself is entirely cabled on single Cat5e/6/7 UTP runs to each display point throughout the location for the quickest, most convenient and cost effective means of transmitting and controlling full, uncompressed 1080p HD video and HD audio we could think of to make sure your time on-site is as productive (and brief) as possible.
2k resolution supported
Conforms to IEEE-568B standards
Each HDMI port also supports DVI signals
Each Output port can be fed to multiple displays (cascaded)
Refined for custom install and home theatre installations
Quick and easy installatio, set up in seconds straight out of box
Reads and copies EDID from connected devices with additional EDID configuration through customisable DIP switch settings if necessary
Fully 3D compatible, frame sequential 3D (Blu-ray) and interlaced stereoscopic 3D (satellite broadcasts etc)
Supports all high definition resolutions up to and including 1080p and standard video formats
RS232 port
Choose from 6 switching modes, infrared remote control, front panel buttons, local IR, IR call-back, LAN and RS232
Simplified ports-Input: HDMI; Output: integrated RJ45 connectors for single Cat5e/6/7 UTP cable to each display point for ease of installation
Enables up to 4 HDMI video/audio devices to be independently switched through up to 4 HDMI displays or projectors for uncompressed digital distribution
Each output able to show any connected source simultaneously regardless of whether the input carries HDCP encryption
Matrix Switcher Video Input Type - HD/HDMI
Routing Type - Audio
Routing Type - Video
Supported Resolution - 1080i (1920x1080)
Supported Resolution - 1080p (1920x1080)
Supported Resolution - 720p (1280x720)
Supported Resolution - SVGA (800x600)
Supported Resolution - SXGA (1280x1024)
Supported Resolution - UXGA (1600x1200)
Supported Resolution - VGA (640x480)
Supported Resolution - WUXGA (1920x1200)
Supported Resolution - XGA (1024x768)
Switcher Type - Audio
Switcher Type - Video
Warranty - Yes
ROHS Compliant - Yes
Rackmountable - Yes
Certifications:
FCC, CE
ROHS Compliant:
Yes
Operating Temperature (Maximum):
35 C
Operating Temperature (Minimum):
-5 C
Number of Inputs:
4
Number of Outputs:
4
Rack Units (Height):
1
Rackmountable:
Yes
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
Warranty (Length/Type):
2 Years Limited
Depth:
235 mm
Height:
52 mm
Width:
440 mm
Product Weight:
2 kg
Peak Power:
22 Watt
Operating Humidity Range:
5 to 90 % (no condensation)
Video Amplifier Bandwidth:
6.75 Gbps
Input Video Signal:
0.5 to 1.0 Vp-p
Input DDC Signal:
12 Vp-p (TTL)
Maximum Single Link Range:
1080p 24-bit Deep Colour