Microphones : Headworn Microphones : Audio-Technica Europe - BP892CLM3

MicroSet Omnidirectional Condenser Headworn Microphone with 3.5mm Locking Mini-Plug

Model: BP892CLM3

Handles high sound pressure levels with ease
Extremely intelligible natural audio
Inconspicuous, lightweight headset with capsule diameter of just 2.6mm
Ideal for applications requiring minimum visibility
Ergonomic under-ear design flexible, lightweight contoured loop hooks behind the ear for an ultra-secure

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

MicroSet omnidirectional condenser headworn microphone with 55" cable terminated with 3.5mm locking mini-plug for Sennheiser wireless. BP892 subminiature omnidirectional condenser headworn microphone, less power module. 1.4 m (55") permanently attached miniature cable terminated for Sennheiser wireless systems using locking 3.5 mm connector. Includes AT8440 cable clip, AT8464 dual-ear microphone mount, two AT8157 windscreens, two AT8156 element covers, a moisture guard and a carrying case.

Handles high sound pressure levels with ease
Extremely intelligible natural audio
Inconspicuous, lightweight headset with capsule diameter of just 2.6mm
Ideal for applications requiring minimum visibility
Ergonomic under-ear design flexible, lightweight contoured loop hooks behind the ear for an ultra-secure
Comfortable fit with or without glasses
Comes equipped with AT8464 dual-ear microphone mount
Converts single ear-worn MicroSet to a dual-ear-worn unit for maximum stability and comfort
Fixed-charge back plate, permanently polarized condenser element
Flat, roll-off (wired only) switch
Accessories furnished:

Headset Mic Type - Condenser
Microphone Connectivity - Wired
Microphone Type - Condenser
Polar/Pickup Pattern - Omnidirectional
Warranty - Yes
Spec Sheet available - Yes

Cable: 1.4 m (55") long (permanently attached to microphone), 1.6mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
Height: 8.10 mm
Impedance: 250 ohm
Sensitivity: -49 dB
Weight:
Current Consumption: 0.10 mA typical at 5V (wireless only)
Dimensions:
Voltage Range: 2.5 to 11 V (wireless only)
Low Frequency Roll-off: 80 Hz 18 dB/octave (wired only)
Cable Length: 1.40 m
Cable Length: 140 cm
Maximum Frequency Response (Bandwidth): 20,000 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Dynamic Range: 104 dB
Maximum SPL (Sound Pressure Level): 135 dB
Signal to Noise Ratio: 63 dB
Current Draw: 0 Amps
DC Voltage: 52 Volts
Warranty (Length/Type): 2 Years Limited End-User
Certifications: FCC
Open Circuit Sensitivity: -49 dB (3.5 mV) re 1V at 1 Pa
Phantom Power Requirements: 11 to 52 V DC 2 mA typical (wired only)
OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
AUDIO-TECHNICA CASE STYLE: M31

Headworn Microphone 549 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

Wireless Headworn Omni-Directional Microphone System, Band B

by Electro Voice

Supercardioid Condenser Headset Microphone

by Electro Voice

Micro-headworn Condenser Microphone with TA4F Connector, Beige

by Electro Voice