The receiver provides three different connections for video conference systems, 3-pin Phoenix terminal strip, mini jack (3.5mm) and 3-pin XLR. The individual microphone signals can be picked up via multipin Phoenix terminal strip. An RS 232 interface and USB connector are provided for data exchange with media control systems or PC. Channels LEDs indicate which channel is occupied (red) and which channel is available (green). With PC connected to receiver volume of individual microphones and operating modes on/off or push-to-mute can be selected with supplied, user-friendly Stegos software. For internal agreements function Global Mute allows muting all microphones simultaneously by pressing button of just one microphone. Battery status of microphones is also displayed. Individual channel settings are stored when receiver is turned off.
- Power on LED
- Selector switch for line/microphone level
- Flush switch for RF band switching with LED
- Standby switch to switch off the microphones
- Status LEDs for maximum of four microphone channels
- USB connector for external operation/monitoring via PC
- RS 232 interface with open protocol for media control system
- Phoenix terminal strip to pickup individual microphone signals eg for the use of external DSP devices
- Two antenna connections for antenna diversity (one Rx and one Tx/Rx antenna)
- Connection to video conference system via 3-pin Phoenix terminal strip, mini jack (3.5 mm) or 3-pin XLR
- Headphone connector with volume control to listen to individual microphone channels or the mix signal
