Signal Processing Systems : Combiners : Hall Technologies - UHBX-6S

HDMI on HDBaseT 1x6 Splitter

Model: UHBX-6S

Extend HDMI video to 6 remote displays using HDBaseT™
Use a single UTP cable to extend video to 100meters (330ft)
Can send 1080p to 150meters (500ft) to Long Reach capable receivers
Supports virtually all HDMI and DVI resolutions
Local HDMI output for direct connection to a local display

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The UHBX-6S is an HDMI splitter with one local HDMI output and 6 HDBaseT™ outputs for extension to compatible receivers up to 150 meters using a single UTP. The Splitter supports HDCP, 3D, Deep Color and CEC. EDID management is integrated into the unit with "Pass-thru", "Learn", and "Emulate" features. Advanced users can use the USB port to download, edit, and upload EDID data to and from the device. The unit provides an RS-232 port that can individually address and control remote displays that feature RS-232 interface. The UHBX-6S provides convenient front panel LED status indicators for all HDBaseT™ parameters to quickly verify proper operation.

The UHBX-6S supports PoH (Power over HDBaseT™). Compatible receivers are powered from the sender using PoH standard so no additional power supplies are needed. The HDBaseT™ compliant PoH performs all necessary low voltage handshakes prior to injecting supply on the UTP line for maximum reliability, safety, and compliance.

Extend HDMI video to 6 remote displays using HDBaseT™
Use a single UTP cable to extend video to 100meters (330ft)
Can send 1080p to 150meters (500ft) to Long Reach capable receivers
Supports virtually all HDMI and DVI resolutions
Local HDMI output for direct connection to a local display
EDID management with USB port for EDID manipulation using a PC
RS-232 port for sending commands to remote displays
Power-over-HDBaseT™ meets IEEE 802.3af standard

Combiner Type - Splitter/Combiner
Warranty - Yes
HDBaseT - Yes
Spec Sheet available - Yes

Input Port: 1x HDMI Female (Type A)
Output Port: 1x HDMI Female (Type A), 6 RJ45 connectors
Standards: DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12bit color depth and 3D video)
Signal Type: HDBaseT
Connectors: Locking HDMI
Video Resolutions: DVI signal VGA (640x480) thru WUXGA (1920x1200); HDTV signal 480i through 1080p; Digital Cinema 4K at 60Hz (4:2:0 8 bit color) or 4K at 30Hz (4:4:4 and 8 bit color) (No Supported in Long Reach)
Audio Formats: All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate)
DDC: Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
CEC: Pass-Thru CEC for Consumer Electronics Control compatible devices
RS232: Bidirectional (full-duplex) any baud rate up to 115,200
PoH: Power-over-HDBaseT meets IEEE 802.3af standard. PD side identifies as Class 2 (3.84–6.49 watts). Actual power consumption of PD side is 5.5 watts max
Temp/humidity: Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
Cooling: Convection
Mounting: Threaded nuts on bottom for rack-shelf mounting or optional rack ears
Enclosure Type: Metal (Aluminum ends, Aluminum Extrusion)
Vibration: ISTA 1A in carton (International Safe Transit Association)
MTBF: 90,000 hours (Calculated Estimate)
Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): 0 C
Certifications: CE, FCC
Number of Inputs: 1
Number of Outputs: 1
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 10.15 Watt
Current Draw: 1.50 Amps
DC Voltage: 48 Volts
Depth: 167.39 mm
Height: 42.16 mm
Width: 285.24 mm
Product Weight: 2.04 kg
Shipping Weight: 2.49 kg
Warranty (Length/Type): 3 Years

RMS-1U-1A - 1RU Rack Mount Shelf

UHBX-R-PD - HDMI + RS232 + IR + PoH UTP Extender with Receiver

Splitter 4907974 kb - Data Sheet

Project List

Splitter 798298 kb - Other

Project List

Suggested Products

1 x 4 4K HDMI to DM 8G+ and HDBaseT Splitter

by Crestron Electronics, Inc.

1 x 2 HDTV Digital Bidirectional Signal Amplifier

by Vanco International

Passive Audio Divider/Combiner - 150 ohm

by RDL, Radio Design Labs