Power Distribution : Power Protection - Surge Protectors and Suppressors : LynTec, Inc. - SGX20-12

Power Conditioning Surge Suppressor with 12 Module Units

Series: SGX20

Model: SGX20-12

Available in 12 module units
Factory installed in LynTec sidecars and ships attached to Lyntec panels
Advanced series mode surge protection
Advanced impedance tolerant EMI/RFI filtering
Self-test circuit with visual indicator

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The SGX20 shall be housed in a steel enclosure. It shall operate from 120 volts AC and have a barrier strip accessible through knock-outs in the enclosure for hardwiring power input and output connections.

The SGX20 shall have a load rating of 20 amps per circuit at 120 volts, a self-test circuit with visual indicator and provide EMI/RFI filtering. It shall meet Federal Grade A, Class 1, Mode 1 guidelines for powerline surge suppressors and withstand at least 1000 occurrences of surge pulse voltages up to 6000 volts.

Available in 12 module units
Factory installed in LynTec sidecars and ships attached to Lyntec panels
Advanced series mode surge protection
Advanced impedance tolerant EMI/RFI filtering
Self-test circuit with visual indicator
10-year warranty

UL Rated - Yes
Warranty - Yes
Spec Sheet available - Yes
Spec Sheet available - Yes

Load Rating: 20 amps per circuit at 120 volts
Power Requirement (no load): 15 watts per circuit
Surge Let-Through Voltage (6000-volt surge): 0 V
UL 1449 Adjunct Classification Test Results: 1000 surges, 6000 volts, 3000 amps, B3 pulse
Measured suppressed voltage: 170 volts; no failures
Federal Guidelines: Grade A, Class 1, Mode 1 (CID A-A-55818)
EMI/RFI Filter, Normal Mode (50-ohm load): 40 dB at 100 kHz; 50 dB at 300 kHz; 50 dB at 3 MHz; 50 dB at 30 MHzEMI/RFI Filter, Common Mode (50-ohm load):18 dB at 300 kHz; 30 dB at 1 MHz; 50 dB at 5 MHz; 50 dB at 20 MHz
Maximum Applied Surge Voltage: 6000 V
Maximum Applied Surge Current: Unlimited, due to current limiting
Maximum Applied Surge Energy: Unlimited, due to current limiting
Endurance (C62.41-1991 category B3 pulses): 1 kV>500,000; 3 kV>10,000; 6 kV>1000
Humidity Range: 5 to 95 % R.H ( Non-condensing)
Operating Temperature (Maximum): 35 C
Operating Temperature (Minimum): 5 C
Certifications: UL, ETL, CSA
Current Rating: 20 Amps
UL Rated: Yes
Warranty (Length/Type): 10 Years Limited

Surge Suppressor 447 kb - Brochure

Project List

Surge Suppressor 258 kb - Data Sheet

Project List

Surge Suppressor 445 kb - Data Sheet

Project List