Steuerungssysteme und Verbindungen : Weitere Steuerungssystem Produkte : RDL, Radio Design Labs - ST-LCR2

Logic Controlled Relay - Latching

Series:

Model: ST-LCR2

Alternate-Action Switching
Add Contacts to Any Control Signal
Activation from Logic Circuits
DPDT Switching Relay
Open-Collector Switching

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

Accessoires

The ST-LCR2 provides double-pole, double-throw dry switching contacts and LED indicator for relay closure. The ST-LCR2 is used where momentary pulses must alternately toggle on/off switching contacts. Open-collector slave output allows connection of remote on indicator or an ST-LCR1 for additional relay contacts.

Alternate-Action Switching
Add Contacts to Any Control Signal
Activation from Logic Circuits
DPDT Switching Relay
Open-Collector Switching
Control from Switch, Button, or Logic Circuits

Operating Temperature (Maximum): 55 C
Operating Temperature (Minimum): -10 C
Control Inputs: SLAVE terminal used as an input from remote push-button or switch turns onput from remote push-button or switch turns on relay when that switch is on. Activation is by connecting slave input to ground. Input from other equipment’s open-collector output turns relay on when open-collector is on.
Note: RDLswitching STICK-ONs have available open-collector outputs suitable for driving ST-LCR2.
5V+ accepts 3.5 to 12 Vdc to activate control circuit. Relay turns on when this input is pulsed high then low, then turns off again the next time it is pulsed high then low.
24V+ accepts 12 to 35 Vdc to activate control circuit. Relay turns on when this input is pulsed high then low, then turns off again the next time it is pulsed high then low.
Output Slave: Open-collector @ 25 mA suitable to drive indicators or slave LCRs.
Switching Contacts: Double-pole, double-throw
Maximum Switching Power: 60 W (220 Vdc, 125 Vac, 2 A)
Power Requirement: 24 to 33 Vdc @ 50 mA

AMS-TS1 - Illuminated Touch-Activated Pushbutton

ST-LCR1 - Logic Controlled Relay - Momentary

ST-LCR1H - High Power Logic Controlled Relay - 8 A

ST-LCR3 - Logic Controlled Relay - Dual Alternate Pulse

STS-RF1 - Shielded Chassis for STICK-ON Module

Datasheet for Logic Controlled Relay - Momentary 712610 kb - Other

Projektliste

DRA-35F
Flat-Pak DIN Rail Adapter

DRA-35S
STICK-ON DIN Rail Adapter

DRA-35S6
STICK-ON DIN Rail Adapter

DTB
STICK-ON® Series Detachable Terminal Block

MB-1
Mounting Kit - RU, ST and TX Series

MB-3
Kit to Mount ST, TX Series Modules on FP Panel

MSR-1
Snap Rail Adapter - STICK-ON Series

SMK-12
STICK-ON Mounting Plate

SR-10
STICK-ON Series Mounting Rack - 10 Modules

SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules

SR-4
STICK-ON Series Mounting Rack - 7 Modules max.

STR-19B
Hinged 19-inch Rack Mount Panel