Signalrouting/- switching : Related Signal Routing / Switching Products : RDL, Radio Design Labs - ST-SSR1

Line-Level Audio Switch - 2x1

Series:

Model: ST-SSR1

Switch Line Level Sources
Select Between Two Balanced Lines
Silent Audio Switching
Switching Without Hard Relay Contacts
Fast Switching for Audio Muting

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

Accessoires

The ST-SSR1 was designed for absolute silent switching of audio signals. It supports two balanced line-level inputs and one balanced output. Each can be used unbalanced as well. The ST-SSR1 is perfect for switching between two input signals or as a silent On/Off switch for a single channel. Performance is in keeping with the technical standards for which RDL® has become known. The user can program the module for either fast or soft switching.

The SELECT input feeds the OUTPUT when the TRIG terminal is grounded, otherwise the OUTPUT is fed by the NORMAL input.

The control current required at the TRIG terminal is so minimal (< 0.5 mA) that the ST-SSR1 can be controlled from nearly any source from switches to logic circuits.

The ST-SSR1 may be controlled using the RDL RC2-ST, RT2 or RUC-4 remote controls.

Switch Line Level Sources
Select Between Two Balanced Lines
Silent Audio Switching
Switching Without Hard Relay Contacts
Fast Switching for Audio Muting
Selection by Open-Collector Logic

Operating Temperature (Maximum): 55 C
Operating Temperature (Minimum): 0 C
Switching Time Fast: Time required for NORMAL input to turn off: 10 us
Switching Time Soft :: 5 ms
Switching Time Fast: Time required for NORMAL input to turn on: 15 us
Switching Time Soft :: 70 ms
Switching Time Fast :Time required for SELECT input to turn off: 15 us
Switching Time Soft:: 10 ms
Switching Time Fast: Time required for SELECT input to turn on: 20 us
Switching Time Soft:: 35 ms
Control Signal: TRIG terminal must be externally pulled to ground
Control Current: 0.5 mA
THD+N: < 0.05 %
Frequency Response: 15 to 20000 Hz (+/- 0.5 dB, bridging load)
30 Hz to 20 kHz (+/- 0.5 dB, 600 ohm load)
Noise (below +4 dBu): < -80 dB (85 dB typical)
Headroom (above +4 dBu): > 18 dB
CMRR: > 45 dB (100 Hz, either port)
Power Requirement: 24 to 33 VDC @ 40 mA

STS-RF1 - Shielded Chassis for STICK-ON Module

Solid-State Audio Relay 887 kb - Other

Projektliste

DRA-35S
STICK-ON DIN Rail Adapter

DRA-35S6
STICK-ON DIN Rail Adapter

DTB
STICK-ON® Series Detachable Terminal Block

MB-1
Mounting Kit - RU, ST and TX Series

MB-3
Kit to Mount ST, TX Series Modules on FP Panel

MSR-1
Snap Rail Adapter - STICK-ON Series

SMK-12
STICK-ON Mounting Plate

SR-10
STICK-ON Series Mounting Rack - 10 Modules

SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules

SR-4
STICK-ON Series Mounting Rack - 7 Modules max.

STR-19A
STICK-ON Series Racking System - 12 Modules

STR-19B
Hinged 19-inch Rack Mount Panel