Beschallungsanlagen, Personenrufsysteme, Hintergrund-Beschallungssysteme : Funkrufsysteme : RDL, Radio Design Labs - ST-VP1

Voice-Over / Paging Module - Manual

Series:

Model: ST-VP1

High-Quality Voice-Over Mixing
Noiseless Paging
Single Input Adapted for Paging or Voice-Over
Selectable Fade-Under or Hard-Cut
Adjustable Fade DEPTH and RATE

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

Accessoires

The ST-VP1 is intended for voice-over paging with user adjusted and controlled FADE or CUT between two input sources. This unit is also perfect for voice-overs where precise and consistent fade levels are required. Automatic operation can be achieved when used in conjunction with RDL's® ST-ACR products.

High-Quality Voice-Over Mixing
Noiseless Paging
Single Input Adapted for Paging or Voice-Over
Selectable Fade-Under or Hard-Cut
Adjustable Fade DEPTH and RATE
Soft Audio Switching

Polar/Pickup Pattern - Other
Microphone Type - Other

Noise: < -85 dB (below +4 dBu output)
Operating Temperature (Maximum): 55 C
Operating Temperature (Minimum): 0 C
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 10 Hz
Minimum Frequency Response (Bandwidth): 0.01 kHz
Frequency Response(Music): 10 to 20000 Hz (+/- 0.25 dB)
THD+N: < 0.01 %
Attenuation when muted: > 65 dB
Frequency Response(Voice): 30 Hz to 20 kHz (+/- 0.25 dB)
THD+N: < 0.01 %
Attenuation when muted: > 80 dB
Input Level: 4 dBu Balanced (may be connected unbalanced)
Output Level: +4 dBu balanced (may be connected unbalanced)
Gain (either input): Unity (balanced input/output)
Headroom: > 18 dB (above +4 dBu)
Fade Rate Adj.: 0.3 to 1.3 seconds
Fade Depth (music input): Adj. 3 to 40 dB
Power Requirement: 24 to 33 VDC @ 45 mA

ST-VP2 - Automatic Ducking Module

STS-RF1 - Shielded Chassis for STICK-ON Module

Datasheet for Voice-Over / Paging Module - Manual 874751 kb - Other

Projektliste

DRA-35S
STICK-ON DIN Rail Adapter

DRA-35S6
STICK-ON DIN Rail Adapter

DTB
STICK-ON® Series Detachable Terminal Block

MB-1
Mounting Kit - RU, ST and TX Series

MB-3
Kit to Mount ST, TX Series Modules on FP Panel

MSR-1
Snap Rail Adapter - STICK-ON Series

SMK-12
STICK-ON Mounting Plate

SR-10
STICK-ON Series Mounting Rack - 10 Modules

SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules

SR-4
STICK-ON Series Mounting Rack - 7 Modules max.

STR-19A
STICK-ON Series Racking System - 12 Modules

STR-19B
Hinged 19-inch Rack Mount Panel