Microphones : Shotgun Microphones : Sennheiser - MKH 418-S

MKH 418-S - RF microphone (directional/bidirectional (M/S arrangement), condenser) with 48 V phantom power & 5-pin XLR-M. AC 418-Y cable (required) available separately (7.8 oz)

Model: MKH 418-S

Part #: 005284

Low inherent self noise
Rugged MKH capsules are impervious to extreme climate conditions
Increased directivity due to interference tube system (capsule)
Very low noise and high SNR
High sensitivity

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Universal M-S stereo shotgun microphone. For every type of application in film, radio, television, and reporting, both indoors and outdoors. Compact design, very good consonant clarity and spatial representation.

Low inherent self noise
Rugged MKH capsules are impervious to extreme climate conditions
Increased directivity due to interference tube system (capsule)
Very low noise and high SNR
High sensitivity
Universal application due to M-S format and mono compatible
Climate-resistant capsules
Rugged/weather-resistant matte black-finished brass body
Independent capsule outputs

Polar/Pickup Pattern - Other
Microphone Type - Condenser
Microphone Type - Shotgun
Microphone Type - Stereo
Microphone Connectivity - Wireless
Spec Sheet available - Yes

Operating Temperature (Minimum): -20 C
Maximum Frequency Response (Bandwidth): 20000 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Minimum Frequency Response (Bandwidth): 40 Hz
Minimum Frequency Response (Bandwidth): 0.04 kHz
Impedance: 1000 ohm
Colour: Matte black
Impedance: 1 Kilo ohm
Operating Temperature (Maximum): 60 C
Maximum SPL (Sound Pressure Level): 130 dB
Wireless: Yes
Product Weight: 0.22 kg
M acoustic operating principle: pressure gradient/interference tube
S acoustic operating principle: pressure gradient
M pickup pattern: supercardioid/lobar
S pickup pattern: figure-of-eight
M sensitivity: 25mV/Pa (-32dBV) at 1kHz
S sensitivity: 10mV/Pa (-40dBV) at 1kHz
Maximum Output Voltage: 1.5 V
M equivalent noise level: 14 and 26 dB
S equivalent noise level: 22 and 34 dB
Output Impedance: <25 ohms (at 1kHz)
Minimum Load Impedance: 1000 ohms
Phantom Voltage: 48 +/-4V/2 x 2.3mA (P48)
Connector: 5-pin XLR, male
Humidity Range: <95 % (relative humidity)
Dimensions: Dia. 19 x 280 mm

Microphone 368753 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor