Shure Microflex MX400D Series microphones are miniature electret condenser gooseneck microphones with a desktop base and attached 3m (approximate)/10ft cable. The desktop base allows these microphones to be used in multi-purpose rooms where quick set-up is required, or where permanent installation is impractical. The Microflex Gooseneck microphones bring a whole new meaning to the word flexible. Beyond their fully adjustable goosenecks lies a new level of flexibility the new Microflex interchangeable condenser microphone cartridge. Designed for easy replacement and available in cardioid polar pattern, the interchangeable cartridge offers wide frequency response and accurate sound reproduction for a broad variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the new Microflex product line for enhanced convenience and consistent sound.
Recommended for general sound reinforcement applications
Wide dynamic range and frequency response for
accurate sound reproduction across the audio spectrum
Balanced, transformerless output for increased immunity to noise over long cable runs
Programmable on/off switch and LED on/off indicator
Logic input and output terminals for remote control or use with automatic microphone mixers
Snap-fit foam windscreen
Desktop base with 10ft cable
Polar/Pickup Pattern - Cardiod
Microphone Type - Other
Microphone Type - Mini Condenser
Spec Sheet available - Yes
Operating Temperature (Maximum):
57 C
Operating Temperature (Minimum):
-18 C
Maximum Frequency Response (Bandwidth):
17 kHz
Maximum Frequency Response (Bandwidth):
17000 Hz
Minimum Frequency Response (Bandwidth):
50 Hz
Minimum Frequency Response (Bandwidth):
0.05 kHz
Maximum SPL (Sound Pressure Level):
123 dB
Sensitivity:
-33.50 dB
Signal to Noise Ratio:
65 dB
Product Weight:
0.81 kg
Shipping Weight:
1.63 kg
Polar Pattern:
Cardioid
Output Impedance:
Rated at 150 ohms (180 ohms actual) at 1000Hz
Open Circuit Sensitivity:
–33.5dBV (21.1mV) at 1kHz, ref. 1V per Pascal), 1 Pascal = 94dB SPL
Maximum SPL:
123 dB (1kHz at 1% THD, 1k ohms load)
Polarity:
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of XLR output connector
Power Requirements:
11 to 52V DC phantom, 2mA
Relative Humidity:
0 to 95 %
Type:
The attached custom cable contains a shielded audio pair and three unshielded conductors for logic control
Certification:
Eligible to bear CE Marking, Conforms to European EMC Directive 89/336/EEC, Meets applicable tests and performance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments