Signalmanagment und -verarbeitung : Verlängerungen : VigilLink - HDFX-500-TR

HDMI 2.0 Fiber-optic Extender

Model: HDFX-500-TR

Supports HDMI2.0 standards feature
Extends up to 4K (4096x2160) at 60Hz, (RGB and YCbCr : 4:4:4)
Transmits HDMI 2.0 data up to 200m (656 feet) over one LC multi-mode fiber (OM3)
Prevents accidental disconnection by using High-Retention HDMI connector
Operates by either USB Power (Both Tx and Rx) or DDC 5V from HDMI source (Tx only)

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Dokumente

HDMI 2.0 optical fiber detachable extender, HDFX-500-TR, extends HDMI 2.0 signal up to 200m (656feet) and transmits 4K UHD (4096x2160) at 60Hz over one LC multi-mode fiber. Leading-edge technology of Opticis allows long distance transmission of 4K signal without any video/audio degradation.

HDFX-500-TR is designed compact enough to be fitted into various installation environments. It gives slim, light, easy installation with perfect electrical isolation, but without electrical hazard and interference. HDFX-500-TR adopted High-Retention HDMI connector, which allows for more retention force than standard HDMI connector, prevents accidental disconnection.

HDFX-500-TR is compliant with HDMI standards features like CEC, EDID and HDCP 2.2 for better installation flexibility and compatibility. It also supports HDR to deliver more realistic, and objective video signal. HDFX-500-TR can be operated by either USB power or DDC 5V power from HDMI source (Tx only). Auto Power-Switching feature makes it more reliable on its power supply.

Supports HDMI2.0 standards feature
Extends up to 4K (4096x2160) at 60Hz, (RGB and YCbCr : 4:4:4)
Transmits HDMI 2.0 data up to 200m (656 feet) over one LC multi-mode fiber (OM3)
Prevents accidental disconnection by using High-Retention HDMI connector
Operates by either USB Power (Both Tx and Rx) or DDC 5V from HDMI source (Tx only)
Provides Auto Power-switching feature
Provides diagnosis feature
Supports 3D contents transmission
Complies with CEC, EDID and HDCP 2.2
Supports HDR at 10 bit or 12 bit speeds respectively within its maximum bandwidth, 18Gbps
Applications:
Medical imaging
Military
Digital Signage
Control room
Simulator
Rental staging

Extender Type - HDMI
Spec Sheet available - Yes
Spec Sheet available - Yes

Electric Connector Type from Systems and to Displays: Pin HDMI receptacle connector
Skew inter-channels: Max. 2ns
Total Jitter at the end of Rx output: Max. 0.6UI
Data Transfer Rate (Graphic Data): Max. 6Gbps
Input and Output Signals: ANSI 8B/10 Level (complying with HDMI2.0)
Photo Diodes in Rx Module: PIN-PD
Laser Diodes in Tx Module: Multi-mode VCSEL (Vertical Cavity Surface Emitting Laser)
Wechselspannung (Maximum): 240 Volts
Wechselspannung (Minimum): 100 Volts
Stromaufnahme: 1 Amps
Operating Temperature (Minimum): 0 C
Operating Temperature (Maximum): 50 C
Transmission Range: 19994.88 cm
Link Power Budget: Min 1dB
Wirkleistung: 2.50 Watt
Optical Connector: Simplex LC connectors
DC-Spannung: 5 Volts
Regulatory Compliance: CEC, EDID and HDCP 2.2
Width: 22 mm
Height: 14 mm
Tiefe: 67 mm

Fiber-optic Extender 451173 kb - Data Sheet

Projektliste

Fiber-optic Extender 481921 kb - Other

Projektliste

Fiber-optic Extender 413023 kb - Data Sheet

Projektliste

Suggested Products

HDBaseT Extender Set with Wall-Plate Transmitter

by Vanco International

High Performance IP to Port Expander

by Aurora Multimedia Corp.

4K HDR 1×4 HDMI Splitter over Cat6 Cable with HDMI Loop-out (Receivers Included) PoE Receivers, 4K HDR 230ft/70m 1080p 330ft/100m

by Vanco International