DigitaLinx HDMI 2.0 HDBaseT Extension Set
Model: DL-HD70LS-H2
- HDMI transmission up to 230ft (70m)
- Complete set Includes TX, RX, power supply and IR flasher/emitter
- Supports resolutions up to 18G 4K60 4:4:4 and HDR
- Built-in surge protection; diagnostic LEDs
- HDCP 2.2 compliant
The DigitaLinx DL-HD70LS-H2 extender set transmits HDMI 2.0 audio and video, up to 4K@60Hz 4:4:4/8 bit color with HDR support, and bidirectional IR up to 70 meters away using a single solid core, shielded Category 6 twisted pair cable. The extender set support HDCP versions up to 2.2. With its slim design the DL-HD70LS-H2 is easy to install in the tightest of spaces. Built in re-clocking circuitry ensures that extender set is backwards compatible with older HDMI version chip sets. The extender system uses 2:1 data compression when the signal surpasses 10Gbps, anything under 10Gbps will never be compressed. System supports flexible power so entire extender circuit can be powered by either the TX or RX side. Supports static HDR (HDR10) only when data rate exceeds 18Gbps, supports dynamic HDR (HDR10+ / Dolby Vision) when data rate is 10Gbps or less. Built-in surge protection helps ensure hassle-free and robust installations. The 18 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected. The DL-HD70LS-H2 is sold only as a set. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.
- HDMI transmission up to 230ft (70m)
- Complete set Includes TX, RX, power supply and IR flasher/emitter
- Supports resolutions up to 18G 4K60 4:4:4 and HDR
- Built-in surge protection; diagnostic LEDs
- HDCP 2.2 compliant
- Bidirectional wideband IR
- Flexible power from either end
- Locking power connector (power supply included)
- Re-clocking circuitry for maximum compatibility
- Package contents:-
- DL-HD70LS-H2 Extender Set
- Quick Install Guide
- (1) IR Emitter
- (1) IR Broadband Receiver (30-50KHz)
- (1) DC18V 1A power supply with US, UK, EU and AU power adapter plugs
- (4) Mounting clips with mounting screws
- (1) IR-AC IR coupler cable
- Extender Type - HDMI
- HDBaseT - Yes
- Warranty - Yes
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 32 F
- Transmission Range: 231 ft
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 12.80 Watt
- DC Voltage: 18 Volts
- Depth: 2.91 in
- Height: 0.60 in
- Width: 5.35 in
- Product Weight: 1.45 lbs
- Warranty (Length/Type): 5 Years
- Video Compliance: HDMI 2.0+, HDCP2.2, and CEC (Consumer Electronics Control)
- Input / Output Resolution Support: SMPTE: Up to 4096x2160@60Hz (4:4:4 chroma sub-sampling / 8 bit deep color), VESA: Up to 1920x1200
- Maximum Pixel Clock: 600 MHz
- Embedded Audio: Up to PCM 8 channel, Dolby Digital, DTS, TrueHD, DTS-HD Master Audio and Dolby Atmos
- IR Carrier Frequency Range: 30-50kHz at 5 V
- Maximum Distance: 1080p: 70 meters / 231 feet, 4K@60Hz 4:4:4: 40 meters / 132 feet
- Cable Requirements: Solid core shielded Category 6 F/UTP or greater with TIA/EIA-568B crimp pattern
- Bandwidth: 18 Gbps (compressed) / 10.2 Gbps (uncompressed)
- ESD Protection: Human-body Model:±8kV (Air-gap discharge) ±4kV (Contact discharge Surge
- Protection: Voltage ±1 kV

WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com