Intelix Series USB3.2 Gen 1 Extender Client Wall Plate

Series: Intelix

Model: INT-USB3-CWP

Client Side wall plate format with 2 USB-A and 1 USB-C ports
Extension of USB 3.2 Gen1 5Gbps data transfer
Backwards compatible USB 2.0 and 1.1
Supports all transfer types including isochronous and bulk transfer
Extension up to 100m supported when U/FTP Cat6A or above cabling is used. Alternate cable types may result in reduced max extension distance

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The USB 3.2 Extender based on HDBaseT VS6320, can extend USB signal to a distance up to 100m/328ft via a single CAT6a cable. Client/Remote device features one USB 3.2 Type C, and two USB 3.2 Type A client ports, one FSYSNC, and RS-232 pass-through. Bi-directional 24V PoC is also supported. It can be widely used for long distance USB signal transmission between USB sources and devices like webcams, PTZ cameras, keyboards, mouse devices, USB microphones, flash sticks, printers, scanners, touch panel displays and other USB devices. Host & Client devices are sold separately, and are fully compatible with box and wall plate style INT-USB3 devices.

Client Side wall plate format with 2 USB-A and 1 USB-C ports
Extension of USB 3.2 Gen1 5Gbps data transfer
Backwards compatible USB 2.0 and 1.1
Supports all transfer types including isochronous and bulk transfer
Extension up to 100m supported when U/FTP Cat6A or above cabling is used. Alternate cable types may result in reduced max extension distance
Plug-and-play operation
RS-232 passthrough
Supports bidirectional 24V POC (power over cable)
USB3 A to A and C to A 2 meter cables included with client side extender
TAA Compliant
Includes
USB 3.2 Extender Wall Plate (RX)
AC Power Cord (1.5m)
USB-C to USB-B cable (2m)
USB-A to USB-B cable (2m)
Machine Screw (KM3*4)
2pin-3.5mm Phoenix Connector
User Manual

Extender Type - USB
HDBaseT - Yes
TAA Compliant - Yes

Transmission Range: 328 ft
Current Draw: 2.70 Amps
DC Voltage: 24 Volts
Color: White
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 47 Watt
Product Weight: 1 lbs
USB Protocol: USB 3.2 Gen 1
Transmission Rate: Up to 5Gbps
Transmission Distance: Up to 100m/328ft @CAT6A (U/FTP) cable
ESD Protection: IEC 61000-4-2:±8kV (Air-gap discharge), ±4kV (Contact discharge)
Receiver: Input: 1× HDBT IN [RJ45 connector, 24V PoC], Output: 2× USB-A DEVICE [USB Type A, 9-pin female], 1× USB-C DEVICE [USB Type C, 24-pin female], Control: 1× RS-232 [3pin-3.5mm phoenix connector], 1× FSYNC [1pin-3.5mm phoenix connector], 1× F/W [USB Type C, firmware update port]

INT-USB3.1-ARJ - Intelix Series USB 3.2 Gen 1 High Performance / Backward Compatible Extender Set

Extender 6348810 kb - Instructions

Project List