Intelix Series USB3.2 over HDBaseT Client Side Extender with DisplayLink

Model: INT-USB3MS-C

Client / Remote 100m HDBaseT extender over Cat6A U/FTP or above
Built in DisplayLink technology & dual HDMI outputs offer screen extend support for PC's & Mac's with DisplayLink drivers
Supports resolutions up to 4K
Pair with Host device INT-USB3-H or INT-USB3-HWP
USB-A & C client ports and dual HDMI outputs

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Intelix Series USB3.2 over HDBaseT Client Side Extender with DisplayLink. USB3.2 Gen 1 5Gbps Client / Remote side extender with DisplayLink for Dual Screen Extend Applications.

Client / Remote 100m HDBaseT extender over Cat6A U/FTP or above
Built in DisplayLink technology & dual HDMI outputs offer screen extend support for PC's & Mac's with DisplayLink drivers
Supports resolutions up to 4K
Pair with Host device INT-USB3-H or INT-USB3-HWP
USB-A & C client ports and dual HDMI outputs
Uses HDBaseT USB Data only technology
Supports USB3.2 Gen 1 data to Host extender
TAA Compliant
Package Contents:-
1× USB 3.2 Gen 1 Extender (Receiver)
1× 24V/2.7A Locking Power Supply
1× 4pin-3.5mm Phoenix Connector (Male)
2× Mounting Ear
4× Machine Screw (KM3*4)
1× USB Cable (USB-A 3.0 to USB-A 3.0, 2m)
1× USB Cable (USB-A 3.0 to USB-C 3.0, 2m)
1× User Manual

Extender Type - USB
HDBaseT - Yes
TAA Compliant - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Transmission Range: 328.08 ft
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 39.36 Watt
Current Draw: 2.70 Amps
DC Voltage: 24 Volts
Depth: 3.74 in
Height: 0.91 in
Width: 7.09 in
Product Weight: 4 lbs
Color: Black
USB Protocol: USB 3.2 Gen 1
Transmission: Rate Up to 5Gbps
HDMI Compliance: HDMI 2.0b
HDMI Video Resolution: Up to 4K@60Hz
ESD Protection: IEC 61000-4-2: ±8kV (Air-gap discharge), ±4kV (Contact discharge)
Receiver: Input: 1× HDBT-USB3 [RJ45 connector, 24V PoC], Output: 2× USB-A DEVICE [USB Type A, 9-pin female], 1× USB-C DEVICE [USB Type C, 24-pin female], 2× HDMI OUT [ Type A, 19-pin female], Control: 1× RS-232 [3pin-3.5mm phoenix connector], 1× FSYNC [1pin-3.5mm phoenix connector], 1× SERVICE [USB Type C, firmware update port]
Housing: Metal Enclosure

Extender 11462844 kb - Instructions

Project List