DigiIP 6000 Series SDVoE Wall Plate Encoder

The IPEX6001U-WP-W is a 3 gang US wall plate SDVoE AVoIP encoder. The DigitalinxIP IPEX6001U-WP-W supports IP-based switching and extension of 4K/60Hz (4:4:4) video with zero frame latency up to 100 meters when using CAT6A F/UTP cabling. The encoder supports independent routing of all AV, USB 2.0, IR, Ethernet and RS232 signals over a 10Gbps network. AV inputs on the IPEX6001U-WP include HDMI and USB-C and the device will auto switch to whichever is connected last. IPEX6001U-WP-W has Icron USB2.0 High Speed host port (USB-B or C can be used as host) allowing USB signals to be routed to IPEX6002U-WP's or IPEX-USB2-C client devices. All encoders, decoders, and transceivers on an AV network can simultaneously transmit and receive full 4K 60 4:4:4 signals. The IPEX6001U-WP-W is HDMI 2.0 and HDCP 2.2 compliant and supports all video resolutions that fit into the HDMI 2.0 timing envelope of 594 MHz, such as 4K@60Hz 4:4:4 24bpp and 4K@60Hz 4:2:0 30bpp HDR, including DolbyVision, HDR10 and HLG. The encoder features light compression technology which is activated automatically when the raw data rate exceeds the 10Gbps Ethernet bandwidth so that all supported timing formats can be delivered through a single 10G Ethernet cable. IPEX6001U-WP-W can be powered over the network via POE+ or by using the optional 24V power supply. Optional 24V power supply is required if USB-C device charging is desired and is part number PS-24D-5A. The IPEX6001U-WP-W can be used in a point to point installation or in a matrix configuration that supports routing of one to one and one to many including multi-view for single display outputs and video wall configurations up to an 8x5 (Rows x Columns). When multiple encoders, decoders, or transceivers are deployed in an AV network, an Arranger hardware controller is required for basic system access and operation. Port speed requirements for each encoder range from 6-9Gbps for 4K signals and 3.2Gbps for 1080P signals, therefore the IPEX6001U-WP-W requires a 10GbE managed network switch for optimal performance, 1GbE managed network switches are not supported.