Signal Processing Systems : Extenders & Repeaters : Liberty AV Solutions - PMI-A9A

Full-Speed USB Extender Client Side

Model: PMI-A9A

USB 2.0 full speed 12Mbps, USB 1.1 legacy support
Up to 330 feet cable lengths on U/UTP category 5/5e/6
Not for USB 2.0 high speed
No external power required, uses host device's 5V power
USB ""A"" male (host) to RJ45 jack connectivity

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The PMI-A9A extenders transmit low speed USB 1.0, 1.1, and 2.0 signals up to 330 feet, and full speed USB 1.0, 1.1, and 2.0 signals up to 100 feet over twisted pair cabling. The PMI-A9A is installed at a remote location to connect peripherals to a host device. The PMI-A9A is plug-and-play, does not require driver software, and uses the same USB circuit as our other USB bus power devices for installation flexibility.

USB 2.0 full speed 12Mbps, USB 1.1 legacy support
Up to 330 feet cable lengths on U/UTP category 5/5e/6
Not for USB 2.0 high speed
No external power required, uses host device's 5V power
USB ""A"" male (host) to RJ45 jack connectivity
Requires compatible client end.
Uses any Cat5/5e/6/6A twisted pair cabling
Extension of USB 1.1 and 2.0 full speed signals
Plenum routing of USB 1.1 and 2.0 full speed
Ideal for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution

Extender Type - USB
ROHS Compliant - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Active Power: 2.50 Watt
DC Voltage: 5 Volts
Shipping Weight: 0.44 lbs
Regulatory Compliance: CE, RoHS
Warranty (Length/Type): 2 years
Transmission Range: 330 ft
Certifications: CE
Depth: 0.87 in
Height: 1.18 in
Width: 1.57 in
Product Weight: 0.10 lbs
Color: Black
USB One: (1) Female USB Type A
Twisted Pair: One (1) 8P8C port (Shielded RJ45)
Full Speed (12 mbps) Maximum Distance via Cat 5e: 100 ft
Low Speed (1.5 mbps) Maximum Distance via Cat 5e: 300 ft
RJ45 Pin Configuration: Pin 1: Data +, Pin 2: Data, Pins 3, 4, 5, and 6: G, Pins 7 and 8: 5 VDC
Enclosure: ABS Plastic
Operating Humidity (Environment): 20% to 90%, Non-condensing
Power: Via USB output of host device
ESD Protection: Contact Discharge: 2 kV, Air Discharge: 4 kV, IEC6

Extender 422997 kb - Data Sheet

Project List